锯片张力检测方式和参数对锯片张力的影响  

The Influence of Saw Blade Tension Detection Methods and Parameters on Saw Blade Tension

作　　者：李运海 LI Yunhai(Guilin Tebon Super hard Material Co.,Ltd.,Guilin 541004,China;Guangxi Key Laboratory of Super hard Material,National Engineering Research Center for Special Mineral Material,Guangxi Technology Innovation Center for Special Mineral Material,China Nonferrous Metal(Guilin)Geology And Mining Co.,Ltd.,Guilin 541004,China)

机构地区：[1]桂林特邦新材料有限公司,广西桂林541004 [2]中国有色桂林矿产地质研究院有限公司广西超硬材料重点实验室,国家特种矿物材料工程技术研究中心,广西特种矿物材料技术创新中心,广西桂林541004

出　　处：《超硬材料工程》2023年第5期37-41,共5页Superhard Material Engineering

基　　金：中国有色桂林矿产地质研究院有限公司科技创新基金“高硬耐火砖用金刚石锯片的开发”(项目编号:KDYCXJJ202208)。

摘　　要：通过改变锯片张力检测夹盘直径和顶出力,研究检测出来的张力值变化,表明夹盘对张力影响巨大,张力值随夹盘直径变化减小到归零;顶出力对张力值影响较小,顶出力变化,张力值变化相对较小,最大仅0.05,但其中有一个顶出力,张力值会达到最大。通过检测方式和参数变化导致张力变化,为锯片检测建立标准提供依据。By changing the tension of the saw blade to detect the diameter and ejection force of the chuck,the changes in tension values detected were studied,indicating that the chuck has a significant impact on tension,and the tension value decreases to zero as the chuck diameter changes;The impact of the ejection force on the tension value is relatively small,and the variation of the ejection force is relatively small,with a maximum of only 0.05.However,if there is one of the ejection forces,the tension value will reach its maximum.Provide a basis for establishing standards for saw blade detection by detecting changes in tension caused by changes in methods and parameters.

关 键 词：金刚石圆锯片 张力检测 张力校正 

分 类 号：TQ164[化学工程—高温制品工业]