检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:何吉祥 朱兵国 彭斌[1] 党兴武[1] He Jixiang;Zhu Bingguo;Peng Bin;Dang Xingwu(School of Mechanical&Electronical Engineering,Lanzhou University of Technology,Lanzhou 730050,China)
出 处:《太阳能学报》2023年第9期249-256,共8页Acta Energiae Solaris Sinica
基 金:国家自然科学基金(51675254,51966009);“科技助力经济2020”重点专项(SQ2020YFF0420989);甘肃省科技计划(20YF8GA057)。
摘 要:采用SST k-ω湍流模型对冷却条件下超临界压力CO_(2)(S-CO_(2))在等截面圆管、水平渐扩管以及不同倾斜角的渐扩管内的传热特性进行数值模拟。模拟结果表明,在相同换热面积下,相比较于等截面圆管,水平渐扩管的总传热系数提高了32.33%,30°倾斜渐扩管提高了33.12%;水平渐扩管的压降降低了53.87%,30°渐扩管降低了9.86%。采用综合性能评价准则PEC,得到水平渐扩管的综合性能最优。基于S-CO_(2)在拟临界温度Tpc处发生“类相变”的假设,获得了类液膜厚度沿管长方向的分布规律,在同一截面处,30°渐扩管的类液膜厚度最小,等截面圆管的类液膜厚度最大,从超临界态类两相的角度解释了强化传热。The SST k-ωturbulence model was used to numerically simulate the heat transfer characteristics of supercritical pressure CO_(2)(S-CO_(2))in constant-section circular tube,horizontal diverging tube and diverging tubes with different inclination angles under cooling conditions.The computational results indicate that compared with that of the uniform cross-section tube,the total heat transfer coefficient of the horizontal diverging tube and the 30°inclined diverging tube are increased by 32.3%and 33.1%respectively under same heat transfer area,and the pressure drop are decreased by 53.87%and 9.86%,respectively.Using comprehensive Performance Evaluation Criteria PEC,it is found that the comprehensive performance of the horizontal diverging tube is the best.Based on the assumption that S-CO_(2)has"phase-transition-like"at pseudo-critical temperature Tpc,the distribution of the liquid-like film along the length of the tube is obtained,and it is found that at the same section,the thickness of the liquid-like film of the 30°diverging tube is the smallest,the liquid-like film thickness of the constant-section circular tube is the biggest.The mechanism of heat transfer enhancement is explained from the point of view of supercritical two-phase-like.
关 键 词:太阳能热发电 超临界压力CO_(2) 数值模拟 布雷顿循环 传热强化 渐扩管
分 类 号:TK124[动力工程及工程热物理—工程热物理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222