检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李婧婧 LI Jing-jing(Sinopec Baling Petrochemical Co.,Ltd.,Yueyang 414014,China)
机构地区:[1]中石化巴陵石油化工有限公司,湖南岳阳414014
出 处:《热固性树脂》2023年第4期31-33,共3页Thermosetting Resin
摘 要:通过水性环氧清漆耐酸碱性能及水性环氧体系改性砂浆抗压强度、抗折强度测试,研究了环氧树脂水性化方法中催化剂三氟化硼乙醚对应用性能的影响。结果表明,三氟化硼乙醚水解产物氢氟酸使水性环氧树脂固化物的耐碱性降低,破坏水泥水化产物结构,致使水性环氧改性砂浆强度降低,经过中和处理除去氢氟酸后的水性环氧改性水泥砂浆的抗压强度和抗折强度增加。The effect of catalyst boron trifluoride ether used in the waterborne epoxy resin waterborne method on the application performance was studied by the tests of acid and alkali resistance of waterborne epoxy varnish and compressive strength and flexural strength of waterborne epoxy system modified mortar.The results showed that the alkali resistance of the cured waterborne epoxy resin was decreased by the hydrofluoric acid of boron trifluoride ether hydrolysate.The structure of cement hydration products was destroyed and the strength of waterborne epoxy modified mortar was decreased.The compressive strength and flexural strength of waterborne epoxy modified cement mortar were increased after neutralization treatment to remove hydrofluoric acid.
关 键 词:水性环氧 水泥砂浆 三氟化硼乙醚 氢氟酸 耐碱性 抗压强度 抗折强度
分 类 号:TQ323.5[化学工程—合成树脂塑料工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7