高真空多层绝热超低温容器漏热分析  

Analysis on heat loss of multi-layer insulation vacuum cryogenic vessels

作　　者：仇放 郭超 QIU Fang;GUO Chao(China Petroleum Engineering&Construction Corp.,Beijing 100101,China)

机构地区：[1]中国石油工程建设有限公司,北京100101

出　　处：《压力容器》2023年第8期53-59,共7页Pressure Vessel Technology

基　　金：中国石油天然气集团有限公司关键核心技术攻关项目(2021ZG13)。

摘　　要：为解决高真空多层绝热超低温容器漏热的设计难点,通过对高真空多层绝热超低温容器支撑结构、容器接管、残余气体传热、辐射传热进行漏热分析,介绍了理论计算和数值模拟计算过程,同时提出了以机械构件和多层绝热结构优化为主的降低漏热的措施,最后将超低温容器蒸发率转化为允许漏热量,并以此作为性能考核指标,建立高真空多层绝热超低温容器漏热设计流程图,分析结果可为工程中的漏热设计提供参考。In order to resolve the design difficulty for heat loss in high vacuum multi-layer insulation(MLI)cryogenic vessels,through the analysis and study on heat loss of high vacuum multi-layer insulation cryogenic vessels,the heat loss analysis was conducted on vessel supports,vessel piping,residual gas heat transfer and radiation heat transfer.The calculation processes of theoretical calculation and numerical simulation were introduced.The heat loss reduction measures were proposed mainly based on the optimization of mechanical components and the multi-layer insulation structures.And finally,the evaporation rate of the cryogenic vessels was converted into the allowable heat loss which was used as a performance evaluation index to establish a flow chart of heat loss design of high vacuum multi-layer insulation cryogenic vessels.The results can provide reference for heat loss design in engineering.

关 键 词：超低温容器 漏热 多层绝热 蒸发率 高真空 

分 类 号：TH49[机械工程—机械制造及自动化] TB658[一般工业技术—制冷工程]