TC21钛合金数控车削参数多目标优化研究  

Research on Multi-objective Optimization of TC21 Titanium Alloy Based on CNC Turning Parameters

作　　者：平艳玲[1] 孙捷夫 Ping Yanling;Sun Jiefu

机构地区：[1]长治职业技术学院,山西省长治市046000 [2]沈阳飞机工业(集团)有限公司

出　　处：《工具技术》2023年第10期109-113,共5页Tool Engineering

摘　　要：为实现TC21钛合金数控车削加工表面粗糙度达标和车削温度可控,利用中心复合试验法设计试验方案,并对试验结果进行极差分析和加工机理分析,以明确车削参数对加工结果的影响规律。基于响应面法建立表面粗糙度和车削温度的单目标预测模型,并通过统计学分析验证预测模型的精度。运用NSGA-Ⅱ遗传算法计算多目标最优车削参数,经实际加工对比验证得出:利用多目标最优车削参数加工所得的表面粗糙度和车削温度与预测值相符,且均满足实际工程要求。In order to meet the requirements of the control of surface roughness and turning temperature of TC21 titanium alloy in actual CNC turning,the center composite method is used to design the test scheme,the range analysis and processing mechanism analysis is carried out to investigate the effect of turning parameters on the machining results.A single-target prediction model of surface roughness and turning temperature is established based on the response surface method,and the accuracy of the prediction model is verified by statistical analysis.The multi-objective optimal turning parameters are calculated based on NSGA-Ⅱgenetic algorithm,and the actual machining comparison and verification show that actual values and predicted values of the surface roughness and turning temperature are close,and satisfy the actual engineering requirements.

关 键 词：TC21钛合金 数控车削 表面粗糙度 车削温度 多目标优化 

分 类 号：TG51[金属学及工艺—金属切削加工及机床] TH161[机械工程—机械制造及自动化]