检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:彭建和[1] 吴韬[2] 侯高峰[3] 沈小璞 胡元超 赵倩青 PENG Jianhe;WU Tao;HOU Gaofeng;SHEN Xiaopu;HU Yuanchao;ZHAO Qianqing(Anhui and Huai River Water Resources Research Institute,Hefei 230088,China;Laboratory of Building Structure of Anhui Higher Education Institutes(Anhui Xinhua Universite),Hefei 230088,China;Anhui Construction Engineering Quality Supervision and Testing Statione,Hefei 230088,China;School of Urban Construction,Anhui Xinhua University,Hefei 230088,China)
机构地区:[1]安徽省水利部淮委水利科学研究院,安徽合肥230088 [2]建筑结构安徽省普通高校重点实验室(安徽新华学院),安徽合肥230088 [3]安徽省建筑工程质量监督检测站,安徽合肥230088 [4]安徽新华学院城市建设学院,安徽合肥230088
出 处:《混凝土与水泥制品》2023年第11期62-66,共5页China Concrete and Cement Products
基 金:安徽省高等学校自然科学研究重点项目(2023AH051817、2022AH051860);安徽省水利部淮委水利科学研究院科技攻关计划项目(KJGG201902);安徽省住建厅住房城乡建设科学技术计划项目(2021-YF41、2023-YF089);安徽新华学院自然科学项目(KLBSZD202208)。
摘 要:为研究不同程度竖向顶部脱空灌浆缺陷对半灌浆套筒接头力学性能的影响,设计和制作了灌浆饱满度分别为60%~100%的五种钢筋试件,并对其进行了单向拉伸、高应力反复拉压和大变形反复拉压试验,分析了不同加载工况下半灌浆套筒接头的破坏模式、抗拉强度、残余变形和灌浆料破坏深度。结果表明:在单向拉伸荷载作用下,灌浆饱满度超过60%后,各试件均未发生钢筋拔出破坏,抗拉强度和残余变形基本一致;在高应力反复拉压和大变形反复拉压荷载作用下,60%灌浆饱满度的试件出现钢筋拔出破坏;随着灌浆饱满度提高,试件残余变形逐渐减小。To study the mechanical performance of semi-grouted sleeve connections with different vertical grouting defects at top,five kinds of semi-grouted sleeve connection specimens with grout fullness of 60%~100%were designed and produced to conduct monotonic tensile,high stress repeated tension-compression and large deformation repeated tension-compression tests.The damage mode,tensile strength,residual deformation,and grout damage depth were analyzed under different loading conditions.The results show that after the grouting fullness exceeded 60%under monotonic tensile loading,no rebar pullout damage occurrs in each specimen,and the tensile strength and residual deformation are basically the same.Under the high stress repeated tension-compression and large deformation repeated tension-compression loading,rebar pullout damage appears in the specimen of 60%grouting fullness.With the increase of the grouting fullness,the residual deformation of semi-grouted sleeve connection is gradually reduced.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.118