蒸汽驱替稠油水热裂解改质行为的室内物理模拟  

Laboratory Physical Simulation of Steam Flooding Heavy Oil Hydrothermal Cracking Upgrading Behavior

作　　者：曹嫣镔 刘明 汪庐山 王坤 初伟 马爱青 王飞 CAO Yanbin;LIU Ming;WANG Lushan;WANG Kun;CHU Wei;MA Aiqing;WANG Fei(SINOPEC,Shengli Oilfield Company,Research Institute of Petroleum Engineering,Dongying Shandong 257000,China;Shandong Key Laboratory of Heavy Oil Production Technology,Dongying Shandong 257000,China;SINOPEC,Shengli Oilfield Company,Dongying Shandong 257000,China)

机构地区：[1]中国石油化工集团有限公司胜利油田分公司/石油工程技术研究院,山东东营257000 [2]山东省稠油开采技术重点实验室,山东东营257000 [3]中国石油化工集团有限公司胜利油田分公司,山东东营257000

出　　处：《辽宁石油化工大学学报》2023年第5期34-41,共8页Journal of Liaoning Petrochemical University

基　　金：中国石化重点科技攻关项目“基于核能供热的稠油地下原位改质技术基础研究”(P20067)。

摘　　要：以胜利油田某稠油作为研究对象,将岩心作为多孔介质填充在岩心驱替仪中模拟地层条件,采用双亲性催化剂,研究了不同反应条件下稠油水热裂解改质行为。结果表明,在多孔介质条件下,采用直接驱替的方式,稠油降黏率达到20.8%;在多孔介质体系中加入双亲性催化剂后,采用先反应后驱替的方式,稠油黏度显著降低,在低温环境(65℃)下进行驱替的降黏率为57.9%,但在低温环境下驱替导致沥青质组分摩尔质量增大,沥青质摩尔质量由5244 g/mol增加到6690 g/mol。当反应完成后保持高温环境(265℃)时,直接用热水驱替的降黏效果更好,裂解程度更高,其降黏率最高达到96.0%。研究结果对稠油水热裂解反应在现场应用过程中的操作条件优化具有重要的指导意义。Taking a heavy oil in Shengli Oil Field as the research object,the core was filled with porous medium in the core displacement instrument to simulate the formation conditions,and the aquathermolysis of heavy oil under different reaction conditions was studied.The results shown that the viscosity reduction rate of heavy oil can reach 20.8% only in porous medium by direct displacement,and the viscosity reduction effect is more obvious in porous medium system after the addition of amphiphilic catalyst for reaction.The displacement viscosity reduction rate after reaction in a low-temperature environment of 65℃ is 57.9%.However,the reaction in a low-temperature environment leads to an increase in the molecular weight of the asphaltene component,with the relative molecular weight of the asphaltene increasing from 5244 g/mol to 6690 g/mol.After the reaction is completed and maintained in a high-temperature environment of 265℃,the displacement has a better viscosity reduction effect,with a maximum comprehensive viscosity reduction rate of 96.0%.It provides an important guiding significance for the optimization of operating conditions of heavy oil aquathermolysis in the field application process.

关 键 词：多孔介质 水热裂解 降黏 族组成 重质组分结构 

分 类 号：TE355[石油与天然气工程—油气田开发工程]