A Melamine–Dialdehyde Starch Wood Particleboard Surface Finish without Formaldehyde  

作　　者：Bengang Zhang Antonio Pizzi Mathieu Petrissans Anelie Petrissans Baptiste Colin 

机构地区：[1]LERMAB,I.U.T.Hubert Curien,University of Lorraine,Épinal,88000,France [2]LERMAB-ENSTIB,University of Lorraine,Épinal,88000,France

出　　处：《Journal of Renewable Materials》2023年第11期3867-3889,共23页可再生材料杂志（英文）

基　　金：supported by a Grant of the French Agence Nationale de la Recherche(ANR)in the Ambit of the Laboratory of Excellence(Labex)ARBRE;supported by“The 111 Project(D21027)”.

摘　　要：Melamine-dialdehyde starch resins used for wood surface finishes have been developed.The reaction of melamine with dialdehyde starch has been shown to occur by FTIR and MALDI ToF spectrometry,with several oligomer species due to the reaction of the two materials being identified,and the resin thermal stability was studied by thermogravimetric analysis.The resins were prepared by two different procedures when it was realized that dialdehyde starch is sensitive to too high a temperature for prolonged times.The melamine-dialdehyde starch resins were applied on particleboard supports as a direct liquid surface finish and a resin-impregnated paper.The surface finishes were tested for adhesion by the cross-cut test,their initial sessile drop contact angle,and the contact angle evolution as a function of time.The best results were obtained by the resins catalyzed by 2% ammonium sulfate and applied to the support surface as a resin-impregnated paper hot pressed for 3 min at 200℃,although the results at 180℃ also looked promising.

关 键 词：Melamine-dialdehyde starch RESINS wood surfacefinishes FTIR MALDI ToF 

分 类 号：O64[理学—物理化学]