再造烟叶实验室辊压法薄片装置的开发及应用  

Development and application of laboratory rolling method sheet device for reconstructed tobacco leaves

作　　者：刘兴乐 张敦铁[1] 王吉利 杨俊鹏[1] 朱峰 夏璠 王昊[1] 邓杰 LIU Xing-le;ZHANG Dun-tie;WANG Ji-li;YANG Jun-peng;ZHU Feng;XIA Fan;WANG Hao;DENG Jie(China Tobacco Hubei Industrial Co.,Ltd.,Wuhan 430040,China;Qingdao Etsong Technology Co.,Ltd.,Qingdao 266071,Shandong,China)

机构地区：[1]湖北中烟工业有限责任公司,武汉430040 [2]青岛颐中科技有限公司,山东青岛266071

出　　处：《湖北农业科学》2023年第10期191-194,共4页Hubei Agricultural Sciences

基　　金：湖北中烟科技项目(2022JSXX3GC2C008)。

摘　　要：研发了实验室环境下再造烟叶辊压法薄片装置,开展了实验室环境下干燥参数对试制薄片质量的影响研究。实验室辊压法薄片装置主要包括辊压模块、厚度控制模块、薄片剥离模块、热风干燥模块,其具有薄片厚度可调可控、厚度均匀、烟粉原料需求少、占地面积小、制样时间短等优点;实验室环境下采用烘箱模拟薄片干燥工艺,通过正交试验研究干燥参数对试制薄片质量的影响。结果表明,实验室辊压法薄片装置可制备的薄片厚度为0.1~0.4 mm,厚度偏差为±0.02 mm;由正交试验得到了实验室最佳干燥工艺条件,即在干燥温度为95℃、干燥时间为180 s时,薄片感官质量的评价得分最高。The rolling method sheet device for reconstructed tobacco leaves in the laboratory environment was developed,and a study was conducted on the influence of drying parameters on the quality of trial produced thin films in the laboratory environment.The laboratory rolling method sheet device mainly included a rolling module,a thickness control module,a thin sheet stripping module,and a hot air drying module.It had advantages such as adjustable and controllable thin sheet thickness,uniform thickness,low demand for tobacco powder raw materials,small footprint,and short sample preparation time;using an oven to simulate the thin film drying process in a laboratory environment,the influence of drying parameters on the quality of trial produced thin films was studied through the orthogonal test.The results showed that the thickness of the thin sheet prepared by the laboratory rolling method sheet device was 0.1~0.4 mm,with a thickness deviation of ±0.02 mm;the optimal drying process conditions in the laboratory were obtained through orthogonal experiments,that was,when the drying temperature was 95℃ and the drying time was 180 seconds,the sensory quality evaluation score of the thin film was the highest.

关 键 词：再造烟叶 实验室辊压法薄片装置 干燥参数 正交试验 

分 类 号：TS43[农业科学—烟草工业]