检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:董泽恒 卢芳云[1] 李翔宇[1] DONG Zeheng;LU Fangyun;LI Xiangyu(College of Liberal Arts and Sciences,National University of Defense Technology,Changsha 410073,China)
出 处:《中国舰船研究》2023年第5期173-179,共7页Chinese Journal of Ship Research
基 金:国家自然科学基金资助项目(12172380);军事类研究生课题资助项目(JY2021C073)。
摘 要:[目的]为了评估反舰导弹内爆载荷冲击下舰载设备生命力,提出一种舰载设备的冲击响应失效分析方法。[方法]对典型船体结构在内部爆炸载荷作用下的冲击响应进行数值模拟,计算冲击响应谱,确定舰载设备所在位置的冲击环境。[结果]通过典型位置的冲击响应谱,得到了不同位置处舰载设备在不同安装频率下的冲击响应参数,通过与冲击设计值对比并建立失效概率模型,形成了针对设备的冲击响应失效分析方法。[结论]采用所提方法可以计算典型舰载设备的失效概率,能为舰载设备在内爆载荷下的毁伤评估与失效分析提供参考。[Objectives]In order to assess the vitality of shipborne equipment consists of important components of a warship system under the action of an anti-ship missile implosion load,this paper propose a response failure analysis method.[Methods]The shock response of a typical hull structure subjected to an internal explosion is numerically simulated,and the shock response spectrum is calculated to determine the impact environment of the location of the shipborne equipment.[Results]Through the shock response spectrum of the typical position,the shock response parameters of shipborne equipment in different positions and at different installation frequencies are obtained,and a failure probability model is established through comparison with the shock design value,thereby forming a shock response failure analysis method for shipborne equipment.[Conclusions]The method proposed in this paper allows the calculation of the failure probability of typical shipborne equipment,and the results can provide references for the damage assessment and failure analysis of shipborne equipment under implosion load.
关 键 词:舰载设备 内爆载荷 冲击环境 失效概率 分析方法
分 类 号:U661.43[交通运输工程—船舶及航道工程] O383[交通运输工程—船舶与海洋工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7