5G网络边缘UPF自动化部署问题研究  

Research on Automatic Deployment of 5G Network Edge UPF

作　　者：宋阿芳[1] 周辉[1] 于培华 姜松 王晴 宋茂倩 陈强[1] Song Afang;Zhou Hui;Yu Peihua;Jiang Song;Wang Qing;Song Maoqian;Chen Qiang(Shanghai Research Institute of China Telecom Corporation Ltd.,Shanghai 200122,China;Cloud Network Operation Department of China Telecom Corporation,Beijing 100027,China)

机构地区：[1]中国电信股份有限公司上海研究院,上海200122 [2]中国电信集团公司云网运营部,北京100027

出　　处：《邮电设计技术》2023年第10期65-69,共5页Designing Techniques of Posts and Telecommunications

摘　　要：目前,5G网络边缘UPF设备部署和验收,需要由设备厂家技术人员多次到园区现场进行设备的人工配置、纳管、调测。这种方式效率低、出错率高、周期长、有一定技术门槛。针对这些问题,提出了UPF二次地址分配、UPF开局自动化配置脚本生成及验收等一系列方案,实现了UPF上电即插即用。整个过程不需专业人员现场操作,减少了人力投入,缩短了UPF上线时间,上线时间由原来的月级下降到1~3天。At present,the deployment and acceptance of 5G network edge UPF devices require multiple visits by technical personnel of the equipment manufacturer to the park site for manual configuration,management,and testing of the equipment,which is low efficiency,high error rate,long cycle and certain technical threshold.Aiming at these problems,a series of schemes are proposed,such as the secondary address allocation of UPF,the generation and acceptance of automatic configuration scripts for UPF opening,etc.,to realize UPF plug and play as soon as power on.The whole process does not require professional personnel to operate on site,which reduces the manpower input,shortens the UPF online time,and reduces the online time from the original monthly level to 1~3 days.

关 键 词：5G UPF 自动化 2B 部署 即插即用 

分 类 号：TN915[电子电信—通信与信息系统]