基于灵敏度分析的可调静叶调节机构运动精度优化  

Motion Accuracy Optimization of Variable Stator Vane Adjusting Mechanism based on Sensitivity Analysis

作　　者：徐峰 曹传军 胡淑慧 张苗苗 XU Feng;CAO Chuan-jun;HU Shu-hui;ZHANG Miao-miao(AECC Commercial Aircraft Engine Co.,Ltd,Shanghai 200241,China)

机构地区：[1]中国航发商用航空发动机有限责任公司,上海200241

出　　处：《航空发动机》2023年第5期115-120,共6页Aeroengine

基　　金：航空动力基础研究项目资助。

摘　　要：为提升高负荷多级轴流压气机静叶调节机构的运动精度,针对5级联调构型,梳理了37个对调节精度可能存在影响的参数,提出了一种基于局部灵敏度分析的参数降维预处理优化方法。通过局部灵敏度分析认识各参数对调节精度的影响规律,甄选重要参数,依靠自主优化程序与多体运动学软件联合的技术途径并采用SQP算法对机构进行优化:仅采用相对灵敏度影响最大的9个参数进行优化时,调节精度达到0.4020°;采用剔除13个绝对灵敏度最小参数后的参数进行优化时,调节精度优化达到0.2000°;而采用全部37个参数进行优化后,调节精度依然为0.2000°。结果表明:所提出的降维预处理优化方法能够在保证运动精度的同时有效减小计算规模,联合优化的方式较传统虚拟样机优化具有更高的精度。To improve the accuracy of the variable stator vane adjusting mechanism of a highly loaded multistage axial compressor,by sorting out 37 parameters that may influence the adjusting accuracy of the five-cascade modulation configuration,a parameter dimension reduction preprocessing optimization method based on local sensitivity analysis was proposed.Through local sensitivity analysis,the influence of each parameter on the adjusting accuracy was understood,and important parameters were selected.Based on the SQP algorithm,the mechanism was optimized by the joint technical approach of an in-house optimization program and Multibody Dynamics(MBD)software.The results show that if the 9 parameters with the greatest influence on the relative sensitivity are used for optimization,the adjusting accuracy is 0.4020°;if the 13 parameters with the smallest absolute sensitivity are removed for optimization,the adjusting accuracy reaches 0.2000°;and if all 37 parameters are used,the accuracy is still 0.2000°.The proposed dimension reduction preprocessing optimization method can ensure motion accuracy and effectively reduce the calculation scale,the joint optimization method also has higher accuracy than traditional virtual prototype optimization.

关 键 词：调节机构 灵敏度分析 调节精度 可调静叶 高负荷多级轴流压气机 航空发动机 

分 类 号：V235.133[航空宇航科学与技术—航空宇航推进理论与工程]