风驱雨与湿热耦合作用下的地面目标表面温度计算模型  

Calculation model of surface temperature of ground target under the coupling effect of wind-driven rain and moisture and heat

作　　者：苏新迪 韩玉阁[1,2] 任登凤[1,2] Su Xindi;Han Yuge;Ren Dengfeng(School of Energy and Power Engineering,Nanjing University of Science and Technology,Nanjing 210094,China;MIIT Key Laboratory of Thermal Control of Electronic Equipment,Nanjing University of Science and Technology,Nanjing 210094,China)

机构地区：[1]南京理工大学能源与动力工程学院,江苏南京210094 [2]南京理工大学电子设备热控制工信部重点实验室,江苏南京210094

出　　处：《红外与激光工程》2023年第10期29-41,共13页Infrared and Laser Engineering

摘　　要：天气环境变幻莫测,阴雨天气更是不可避免,研究地面目标表面热特征可以更好地服务于热红外探测与热红外制导,提高目标定位的准确性。阴雨天气条件下地面目标表面降雨分布受降雨、风力影响;地面背景受透水材料的水分吸收及蒸发带来的潜热影响,致使地面目标表面的热特征具有不确定性。文中将空气流动模型、辐射换热模型、风驱雨模型和湿热耦合模型相结合,在开源平台Open FOAM提出了一种集成考虑风驱雨与湿热耦合的地面目标表面温度计算模型,研究阴雨天气条件下地面目标表面的热特征以及降雨强度和风向对目标表面温度特性的影响。结果表明:利用该集成计算模型计算目标表面温度的模拟值与热电偶实测值变化趋势高度一致,数值计算24 h各表面的平均绝对误差为0.95 K;存在降雨的时刻目标表面的温差较小,受降雨与风向的影响,目标的迎风面因降雨捕获率较高,温度通常低于背风面温度;降雨强度、风速风向发生改变均会影响目标表面降雨捕获率分布,从而影响表面温度特征分布。研究表明该方法具有可靠性和较好的精确性,可为阴雨天气条件下复杂地面目标的热特性分析提供方法支撑。Objective The weather environment is unpredictable,and rainy weather is even more inevitable.Studying the surface thermal characteristics of ground targets can better serve thermal infrared detection and guidance,improving the accuracy of target positioning.Most of the existing research on the thermal and infrared characteristics of ground targets is based on sunny conditions,while few studies have been conducted on the surface temperature characteristics of ground targets under cloudy and rainy conditions.The distribution of rainfall on the surface of ground targets under overcast and rainy weather conditions is affected by rainfall and wind force;The ground background is affected by the latent heat caused by moisture absorption and evaporation of permeable materials,resulting in uncertainty in the thermal characteristics of the ground target surface.Therefore,this paper proposes a calculation model for surface temperature of ground targets that integrates winddriven rain and moisture heat coupling,and studies the thermal characteristics of surface targets under overcast and rainy weather conditions,as well as the effects of rainfall intensity and wind direction on surface temperature characteristics of targets.Methods In Open FOAM,an open source platform,combining air flow model,radiation heat transfer model,wind-driven rain model,and moisture heat coupling model,a ground target surface temperature calculation model integrating wind-driven rain and moisture heat coupling is established(Fig.2),and the call and coupling process is given(Fig.3).The reliability and accuracy of the integrated model were verified using CUBI model experiments.The calculated temperature curve was similar to the temperature variation trend of the characteristic points on the surface of the CUBI model in the experiment(Fig.9),and the average absolute error was 0.95 K.The calculation model is used to study the thermal characteristics of the surface of a ground target under overcast and rainy weather conditions,as well as the effects of ra

关 键 词：雨 地面目标 风向 降雨强度 热特征 

分 类 号：TN219[电子电信—物理电子学]