检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:木巴来克·都尕买提 美合日阿依·穆太力普 胡丽娜 辛公明[2] Mubalaike Dugamaiti;Meihereayi Mutailipu;Hu Lina;Xin Gongming(School of Electrical Engineering,Xinjiang University,Urumqi 830049,China;School of Energy and Power Engineering,Shandong University,Jinan 250061,China)
机构地区:[1]新疆大学电气工程学院,乌鲁木齐830049 [2]山东大学能源与动力工程学院,济南250061
出 处:《发电设备》2023年第6期348-356,共9页Power Equipment
基 金:新疆维吾尔自治区自然科学基金青年项目(2021D01C089);新疆维吾尔自治区“天池”博士计划(TCBS202006)。
摘 要:回转式空气预热器漏风问题是其不可避免的缺陷,其中径向漏风是最主要的漏风形式.以某电厂660MW机组锅炉的三分仓回转式空气预热器为研究对象,基于空气预热器整体建模的方式对其径向漏风特性进行研究,系统分析漏风率对转子易发生腐蚀积灰区域和锅炉效率的影响规律.结果表明:空气预热器的排烟温度随着热端径向漏风率的增加而升高,随着冷端径向漏风率的增加而降低,并且冷端径向漏风会加重低温腐蚀;热端径向漏风对排烟损失的影响远大于冷端径向漏风,排烟损失随径向漏风率的增加而增加;在锅炉最大连续蒸发量(BMCR)工况下,空气预热器热端径向漏风率每增加1%,锅炉效率降低0.02%.The rotary air preheater has the inherent defect of air leakage, and the radial air leakage is the most influential air leakage form. Taking the tri-sector air preheater of a 600 MW unit boiler in a power plant as the research object, the characteristics of radial air leakage were researched based on the whole modeling of air preheater, while systematic analyses were conducted on the influence of the air leakage rate on the rotor area with a high risk of corrosion and ash accumulation, and the boiler efficiency. Results show that, the exhaust gas temperature of air preheater increases with the increase of radial air leakage rate at the hot end, and decreases with the increase of radial air leakage rate at the cold end;meanwhile, the radial air leakage at the cold end may aggravate the low temperature corrosion. Compared with the radial air leakage at the cold end, the radial air leakage at the hot end has a greater influence on the exhaust gas heat loss, and the exhaust gas heat loss increases with the increase of radial air leakage rate. When the radial air leakage rate at the hot end of the air preheater increases 1%, the boiler efficiency will decrease by 0.02% under boiler maximum continuous rating (BMCR) condition.
分 类 号:TK223.34[动力工程及工程热物理—动力机械及工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222