狭缝孔锥形分布板对流态化反应器内部流动特性的影响  

Effect of conical distribution plate with slit hole on flow characteristics in fluidized reactor

作　　者：王天成 陈功 王德喜 邵立新 Tiancheng WANG;Gong CHEN;Dexi WANG;Lixin SHAO(School of Mechanical Engineering,Shenyang University of Technology,Shenyang,Liaoning 110870,China;School of Chemical Equipment,Shenyang University of Technology,Liaoyang,Liaoning 111000,China)

机构地区：[1]沈阳工业大学机械工程学院,辽宁沈阳110870 [2]沈阳工业大学化工装备学院,辽宁辽阳111000

出　　处：《过程工程学报》2023年第10期1390-1400,共11页The Chinese Journal of Process Engineering

摘　　要：针对目前污水处理流态化反应器存在液相返混、液固混合不均的问题,设计了一种开有狭缝孔的锥形分布板,该分布板上单孔的开孔面积由反应器中心向反应器外侧逐渐增加,并采用欧拉-欧拉多相流模型、RNG k-ε湍流模型对狭缝孔锥形分布板进行数值仿真计算。结果表明,狭缝孔锥形分布板能够使反应器内部形成多个环核流流动,强化液固两相之间的混合。此外,狭缝孔锥形分布板能够使反应器内部的颗粒均布,避免颗粒在反应器壁面附近聚集,且颗粒能够获得较高的循环速度。综合评估颗粒体积分数、流速和床层密度标准差等参数,狭缝孔锥形分布板的狭缝孔的最佳开孔方式为垂直于中心轴线方向,最佳锥角为120°。Water pollution has gradually become one of the prominent problems restricting the harmonious development of urban ecosystem. At present, the development of efficient wastewater treatment technology has important practical significance to alleviate this problem. Wastewater treatment reactor is the core equipment of wastewater treatment, and the internal flow characteristics affected by its structure have an important impact on water treatment efficiency.Fluidization reactor has become a common sewage treatment equipment because of its high heat and mass transfer rate. In view of the liquid phase back mixing and uneven liquid-solid mixing still exist in fluidized reactor for wastewater treatment. Based on the mobile biofilm wastewater treatment technology and the concept of maximizing the space utilization of integrated wastewater treatment equipment, a rectangular fluidized reactor with slit hole conical distribution plate was designed. The orifice area of the distribution plate gradually increased from the center of the reactor to the outside, and the Euler-Euler multiphase flow model and RNG k-ε turbulence model were used for numerical simulation of the fluidized reactor with a conical distribution plate with slit holes. The effect of the distribution plate structure on the distribution of particles in the reactor was studied by the arrangement of the holes and the cone angle of the slit hole conical distribution plate. The results showed that the conical distribution plate with slit holes can solve the problems of liquid-phase backmixing and uneven liquid-solid mixing, form multiple ring core flows in the reactor, improve the uniformity of particle distribution, and strengthen the liquid-solid mixing. Based on the comprehensive evaluation of particle volume fraction, flow rate, and bed density standard difference, the optimal hole distribution mode of the slit conical distribution plate was determined to be perpendicular to the central axis, and the optimal fluidization effect of the reactor appeared under th

关 键 词：分布板 数值模拟 流态化反应器 污水处理 

分 类 号：X703[环境科学与工程—环境工程]