检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:孟普 鲍方翔 程龙胜 Meng Pu;Bao Fangxiang;Cheng Longsheng(School of Mechanical and Vehicle Engineering,Bengbu University,Anhui Bengbu 233030)
机构地区:[1]蚌埠学院机械与车辆工程学院,安徽蚌埠233030
出 处:《南方农机》2023年第23期146-149,共4页
基 金:国家大学生创新创业训练计划项目(20221135018);蚌埠学院校级质量工程项目(2020jyxm7)。
摘 要:【目的】避免多套单工序模造成的定位误差,设计复合模难以完成的复杂形状工件,在保证工件精度的基础上进一步提高生产效率。【方法】课题组提出了一种多工位级进模的设计方法,以表芯盖为例,从材料、结构、精度等方面对表芯盖展开分析,对其进行多工位级进模设计,设计出了表芯盖生产的首次拉深—第二次拉深—整形—冲孔—落料多工位级进模。【结果】排样方式为单排直排,步距58 mm,采用双侧刃和导正销共同定位;模具采用正装结构,实现零件和废料的自然分离;凹模按工位分别制作,利用固定板固定;拉深工位凹模内安装弹性顶件器,方便工件顶出。【结论】模具未开设空工位,极大地简化了模具结构,减小了模具整体尺寸,节约了加工成本。用多工位级进模设计的材料利用率为60%,不仅成本低,而且生产效率较高,未来能够进一步推动生产现代化、智能化发展。[Objective]To avoid positioning errors caused by multiple sets of single process molds,design complex shaped workpieces that are difficult to complete with composite molds,and further improve production efficiency while ensuring workpiece accuracy.[Method]The research group proposed a design method for a multi-position progressive die.Taking the watch core cover as an example,it analyzed the material,structure,accuracy,and other aspects of the watch core cover,and designed a multi-position progressive die for it.We have designed a multi-position progressive die for the production of watch core covers,which includes first drawing,second drawing,shaping,punching,and blanking.[Result]The layout method is single row straight layout,with a step distance of 58 mm,and is positioned together with double-sided blades and guide pins.The mold adopts a formal structure to achieve natural separation of parts and waste.The concave mold is made according to the workstation and fixed with a fixed plate.An elastic ejector is installed in the concave mold of the deep drawing station to facilitate the ejection of the workpiece.[Conclusion]The absence of empty workstations in the mold greatly simplifies the mold structure,reduces the overall size of the mold,and saves processing costs.The material utilization rate designed with multi-station progressive molds is 60%,which not only has low cost but also high production efficiency.In the future,it can further promote the modernization and intelligent development of production.
分 类 号:TG386[金属学及工艺—金属压力加工]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.133.113.227