常见金属镀膜纤维鉴别方法的探讨  

Identification Methods of Common Metallized Fibers

作　　者：葛晓青 胡凇月 张锋 孟振华 Ge Xiaoqing;Hu Songyue;Zhang Feng;Meng Zhenhua(Tianfang Standard Testing&Certification Co.,Ltd.,Tianjin 300308,China;Tianfangbiao Starndard(Shanghai)Testing Technology Co.,Ltd.,Shanghai 201702,China;Yijianzhida New Media Technology(Tianjin)Co.,Ltd.,Tianjin 300000,China)

机构地区：[1]天纺标检测认证股份有限公司,天津300308 [2]天纺标(上海)检测科技有限公司,上海201702 [3]易建智达新媒体科技(天津)有限责任公司,天津300000

出　　处：《针织工业》2023年第10期72-75,共4页Knitting Industries

摘　　要：文章主要探讨采用显微镜法、电感耦合等离子体发射光谱法(ICP-OES)、X射线荧光光谱法对金属镀膜纤维进行鉴别的可行性,以常见的金属镀膜纤维为研究对象,观察各种样品在显微镜下的纤维形态,并通过ICP-OES法和X射线荧光光谱法测试各样品中金属元素的含量。结果表明,采用显微镜法能够鉴别纤维表面是否存在镀膜,ICP-OES法结合X射线荧光光谱法能够测试金属元素的含量,将两者有机结合即可准确鉴别金属镀膜纤维。In this paper,the methods of identification of metallized fibers by microscope,inductively coupled plasma atomic emission spectrometry(ICP-OES)and X-ray fluorescence spectrometry are discussed.The common metallized fibers are studied,the fiber morphology of various samples is observed under the microscope,and the content of metal elements in each sample is tested by ICP-OES and X-ray fluorescence spectrometry method.The results show that the metal coating on the fiber surface can be identified by microscope,and the content of metal in the fiber can be measured by ICP-OES and X-ray fluorescence spectrometry,and the combination of the two methods can accurately identify metallized fibers.

关 键 词：金属镀膜纤维 纤维鉴别方法 显微镜法 ICP-OES X射线荧光光谱法 

分 类 号：TS107[轻工技术与工程—纺织工程]