一种具有温度补偿功能的电感器电流检测电路  

A Circuitry of Inductor's Current Sensing with Temperature Compensation

作　　者：康丙寅 刘文韬[1] 唐光庆[2] 李涛[2] 乔江[1] Kang Bingyin

机构地区：[1]中国电子科技集团公司第二十四研究所,重庆400060 [2]中国人民解放军93147部队,重庆400060

出　　处：《工业控制计算机》2023年第11期148-149,152,共3页Industrial Control Computer

摘　　要：利用电感器直流电阻检测电流以减小I2R功率损耗。然而,电感器铜线绕组的电阻随温升而增大,降低了电流检测的准确度。设计的电源控制器集成温度补偿模块,将基于负温度系数温敏电阻器的温度补偿电路的检测信号,通过有源钳位的方式实现25°C~85°C温度范围内的线性补偿,线性相关指数为0.9987,补偿误差小于3.9%。This paper utilized the inductor's direct current resistance to measure its current to reduce I2R power loss.However,the resistivity of inductor's copper coil increases with temperature,reducing the current measurement accuracy.The designed power controller integrated a temperature compensation module.By an active clamp of signal from the temperature compensation circuitry based on a negative temperature coefficient thermistor,the temperature compensation is realized linearly between 25°C and 85°C with a correlation of 0.9959 and an error less than 3.9%.

关 键 词：温度补偿 负温度系数 温敏电阻器 有源钳位 

分 类 号：TM55[电气工程—电器]