智能工厂全自动胎坯立体库中胎坯托盘对轮胎性能的影响分析及优化  

Analysis and Optimization of Impact of Green Tire Pallet of Intelligent Factory Fully Automatic Green Tire Space Warehouse on Tire Performance

作　　者：苗程成 李超 聂本梁 张则高 周鹏程 MIAO Chengcheng;LI Chao;NIE Benliang;ZHANG Zegao;ZHOU Pengcheng(Triangle Group Co.,Ltd,Weihai 264200,China)

机构地区：[1]三角轮胎股份有限公司,山东威海264200

出　　处：《橡胶科技》2023年第11期546-550,共5页Rubber Science and Technology

摘　　要：从智能工厂全自动胎坯立体库胎坯存放时间和温度、胎坯托盘表面材质和尺寸4个方面研究其对载重子午线轮胎性能的影响。结果表明:胎坯存放时间尽量缩短,应小于24 h;存放温度宜在24℃左右;胎坯托盘倾角应与胎坯倾角相近,托盘内、外直径应与胎坯内、外直径相匹配,托盘边缘采用倒圆角,托盘表面采用塑料材质且加工成弧面;优化后胎坯的压痕深度较小,轮胎的外观、X光检测合格,动平衡性能变化不大。The impact of green tire pallet of an intelligent factory fully automatic green tire space warehouse on the performance of truck and bus radial tire was studied from four aspects,the storage time and temperature,the size and surface material of green tire pallet.The results showed that the storage time of tire should be minimized to less than 24 hours,the storage temperature should be around 24℃.The inclination angle of the green tire pallet should be similar to the inclination angle of the green tire,and the inner and outer diameters of the pallet should match the inner and outer diameters of the green tire.The edge of pallet should be rounded,and the surface of pallet should be made of plastic material and processed into an arc.After optimization,the indentation depth of the green tire was small,the appearance and X-ray detection of finished tire were qualified,and the dynamic balance changed little.

关 键 词：全自动立体库 胎坯 托盘 尺寸 存放时间 存放温度 

分 类 号：TQ336.1[化学工程—橡胶工业] TQ330.4+93