腓骨近端骨折对伸直状态下膝关节应力影响的有限元分析  

Finite element analysis of effect of proximal fibular fracture on knee joint stress in an extended state

作　　者：汪嘉琪 唐江安[2] 黄国华[2] 孔德策 赵一丁 龚璐璐[3] 潘红元 孔德伟 刘粤[2] 杨铁毅[2] Wang Jiaqi;Tang Jiangan;Huang Guohua;Kong Dece;Zhao Yiding;Gong Lulu;Pan Hongyuan;Kong Dewei;Liu Yue;Yang Tieyi(Shanghai Pudong New Area Gongli Hospital Postgraduate Training Base,Ningxia Medical University,Shanghai 200135,China;Department of Orthopedics,Shanghai Pudong New Area Gongli Hospital,Shanghai 200135,China;College of Life Science and Technology,Tongji University,Shanghai 200092,China)

机构地区：[1]宁夏医科大学上海市浦东新区公利医院研究生培养基地,上海市200135 [2]上海市浦东新区公利医院骨科,上海市200135 [3]同济大学生命科学与技术学院,上海市200092

出　　处：《中国组织工程研究》2024年第30期4757-4762,共6页Chinese Journal of Tissue Engineering Research

基　　金：上海市浦东新区卫生健康委员会2020年度卫生科技项目(PW2020A-28),项目负责人:刘粤;上海市浦东新区卫生健康委员会临床特色学科(PWYts2021-05),学科负责人:杨铁毅;上海市浦东新区公利医院拔尖人才(GLRb2020-04),项目负责人:刘粤。

摘　　要：背景:传统观点认为绝大多数的腓骨近端骨折是不需要固定的,他人和此次研究提示,近端腓骨结构对于膝关节后外侧结构的稳定性具有重要影响,其作用机制值得研究。目的:探讨腓骨近端骨折对于伸直状态膝关节各结构生物力学的影响。方法:运用有限元方法进行仿真生物力学试验。选用1名健康青年男性志愿者膝关节MRI和CT影像数据资料建立伸直状态下的膝关节有限元模型,并模拟4种近端腓骨形态:模型A为完整模型,模型B为腓骨头下以远1 cm骨折模型,模型C为腓骨近端最顶端向远端1 cm的尖端缺损骨折模型,模型D为腓骨近端最顶端向远端2 cm的骨缺损模型。在股骨干上施加纵向集中载荷1500 N,对比分析膝关节伸直状态下,4种工况下膝关节各个结构最大等效应力、最大第一主应力的分布以及改变趋势。结果与结论:①模型A胫骨软骨、半月板外侧室最大等效应力大于内侧;胫骨平台、半月板内侧室最大第一主应力大于外侧;股骨软骨内侧髁最大等效应力大于外侧髁,股骨软骨内侧髁最大第一主应力大于内侧髁;②相较于模型A,模型C的软骨、半月板的最大等效应力和最大第一主应力大小以及分布情况无明显差异;③相较于模型A,模型B的最大等效应力上升幅度依次为内侧胫骨软骨(14.9%),股骨软骨内侧髁(13.6%),内侧半月板(6.6%);最大第一主应力上升幅度依次为内侧半月板(11.06%),内侧胫骨软骨(8.65%),股骨软骨内侧髁(7.46%);韧带的最大等效应力上升幅度依次为:腘弓状韧带(33.2%)>前交叉韧带(21.3%)>腓侧副韧带(17%)>后交叉韧带(14.3%)>前外侧副韧带(13.2%)>内侧副韧带(10.1%);④相较于模型A,模型D的最大等效应力上升趋势依次为内侧胫骨软骨(19.5%),股骨软骨内侧髁(17.9%),内侧半月板(9.9%);最大第一主应力依次为内侧半月板(14.04%),内侧胫骨软骨(13.03%),股骨软骨内侧髁(11.37%);韧带最大等�BACKGROUND:The traditional view is that proximal fibular fractures do not require fixation.Others and our research suggest that the proximal fibular structure plays an important role in the stability of the posterolateral structure of the knee joint,and its mechanism of action is worth studying.OBJECTIVE:To investigate the biomechanical effects of proximal fibular fractures on various structures of the knee joint in an extended state.METHODS:Finite element method was used to conduct simulated biomechanical experiments.A healthy young male volunteer was selected to establish a finite element model of the knee joint in an extended state using MRI and CT image data,and four proximal fibular shapes were simulated(Model A:intact,Model B:1 cm fracture below the fibular head,Model C:1 cm tip defect fracture from the proximal end of the fibula to the distal end,and Model D:2 cm bone defect from the proximal end of the fibula).A longitudinal concentrated load of 1500 N was applied to the femoral shaft to compare and analyze the distribution and changing trend of the maximum equivalent stress and maximum first principal stress of each structure of the knee joint in an extended state under four working conditions.RESULTS AND CONCLUSION:(1)In Model A,the maximum equivalent stress in the tibial cartilage and lateral compartment of the meniscus was greater than that in the medial compartment,while the maximum first principal stress in the tibial plateau and medial compartment of the meniscus was greater than that in the lateral compartment.The maximum equivalent stress of the medial condyle of the femoral cartilage was greater than that of the lateral condyle,and the maximum first principal stress of the medial condyle of the femoral cartilage was greater than that of the medial condyle.(2)Compared to Model A,there was no significant difference in the magnitude and distribution of the maximum equivalent stress and maximum first principal stress in the cartilage and meniscus of Model C.(3)Compared to Model A,the maximum equival

关 键 词：腓骨近端骨折 有限元分析 生物力学 半月板 关节软骨 

分 类 号：R459.9[医药卫生—治疗学] R318[医药卫生—临床医学] R686.5