基于弹簧-质点模型的单贾卡经编鞋材三维仿真  

Three-dimensional simulation of single jacquard warp knitted shoe fabrics based on spring-mass model

作　　者：杨美玲 蒋高明[1] 王婷 李炳贤 YANG Meiling;JIANG Gaoming;WANG Ting;LI Bingxian(Engineering Research Center for Knitting Technology,Ministry of Education,Jiangnan University,Wuxi,Jiangsu 214122,China)

机构地区：[1]江南大学针织技术教育部工程研究中心,江苏无锡214122

出　　处：《纺织学报》2023年第11期113-119,共7页Journal of Textile Research

摘　　要：为实现单贾卡经编间隔提花鞋面织物结构的可视性,改善三维形变仿真效果,基于鞋材织物分区功能设计原理,研究单把贾卡梳生产间隔鞋材织物的提花原理与设计方法,利用二次Bezier曲线建立线圈单元三维几何结构模型。基于传统二维弹簧-质点模型的结构与应用原理,提出适用于三层间隔鞋材织物的三维弹簧-质点模型,建立三维空间线圈粒子集合体。根据牛顿第二定律,建立线圈粒子运动形变位移动力学方程,并采用显式中点法求解质点受力位移与速度,确定质点运动轨迹和状态。针对形变仿真过程中易出现的超弹现象,采用调整质点位移、弹簧端点的分速度、弹簧-质点的组成结构等措施,以达到更真实的模拟效果。借助JavaScript和C#计算机程序设计语言,实现了单贾卡经编间隔鞋材的三维仿真,并与实物图对比,验证力学模型的科学有效性。Objective In order to explore the mesh deformation principle in the warp knitted jacquard spacer shoe material fabric,the interaction mechanism of the loops on both sides of the mesh in the warp knitted single needle bed fabric is used to form a three-dimensional spring-mass particle tensile action geometric model between the loops of the surface layer,the bottom layer and the middle spacer layer.The tensile mechanical deformation equation and offset distance between the loops in the jacquard spacer shoe fabric are obtained to improve the three-dimensional(3-D)deformation simulation effect of single jacquard warp knitted double needle bed interval jacquard shoe fabric.Method Aiming at the mesh area division design of warp knitted jacquard spacer shoe fabric,the jacquard principle of single jacquard comb in fabric forming is studied,and the jacquard artwork is designed and drawn.Using the quadratic Bezier curve to establish the unit loop model,and aiming at the three-dimensional structure of the spacer shoe fabric,the three-dimensional spring-mass model that conforms to the actual fabric structure is constructed,including the shearing spring,structural spring,and bending spring.The offset is worked on by the explicit integration method.Results The single jacquard comb performs jacquard action on one side of the fabric of the spacer shoe fabric,forming a rich upper appearance through thick,thin and mesh fabric effects.The functional areas of the single jacquard warp knitted spacer vamp are divided(Fig.1).Using red,white and green to form a single jacquard artwork,it shows fabric structures with different mesh sizes and thicknesses(Fig.2).Using the natural transition principle of the tangent line of the quadratic Bezier curve,the motion track value of the continuous points of the loop at the tangent line is calculated.A total of 8 shape point control unit loops are adopted to build a three-dimensional geometric model of the loop,which more realistically shows the bending shape of the loop(Fig.3,Fig.4).On the basis o

关 键 词：经编鞋材 间隔织物 成圈贾卡 提花原理 弹簧-质点模型 三维仿真 

分 类 号：TS186.3[轻工技术与工程—纺织材料与纺织品设计]