电动潜油泵电缆用三元乙丙橡胶绝缘橡皮的研制  

Study on Ethylene Propylene Diene Monomer Insulation Rubber for Electric Submersible Pump Cables

作　　者：陈乾坤 贺超武 黄田 CHEN Qiankun;HE Chaowu;HUANG Tian(Changsha Hengfei Cable Co.,Ltd.,Changsha 410200,China;Guangzhou Xinxing Cable Industry Co.,Ltd.,Guangzhou 511300,China)

机构地区：[1]长沙恒飞电缆有限公司,长沙410200 [2]广州市新兴电缆实业有限公司,广州511300

出　　处：《电线电缆》2023年第6期21-25,共5页Wire & Cable

摘　　要：基于对电动潜油泵电缆用绝缘材料三元乙丙橡胶的研究,通过三元乙丙橡胶与防老体系、增塑体系、补强体系、硫化剂等配合体系的试验,研制出的电动潜油泵电缆用三元乙丙橡胶硫化胶的抗张强度大于14 MPa,体积电阻率大于1.0×10^(15)Ω·cm。产品试验结果表明,该材料具有良好的机械性能、电性能和耐油性能,各项性能指标均能达到电动潜油泵电缆的技术要求,尤其在耐油性能、防水性能等方面具有明显优势。Based on the research of ethylene propylene diene monomer,the insulation material for electric submersible pump cables.The tests of ethylene propylene diene monomer,aging prevention system,plasticizing system,reinforcing system and vulcanizing agent were emphasized.The tensile strength of ethylene propylene diene monomer vulcanizate for submersible pump cables was over 12 MPa,and its volume resistivity was over 1.0×10^(15)Ω·cm.Through the product test,results showed that the material had good mechanical properties,electrical properties and oil resistance,and all the performance indexes fully met the technical requirements of electric submersible pump cables,especially in terms of oil resistance and waterproof performance had obvious advantages.

关 键 词：潜油泵 潜油泵电缆 三元乙丙橡胶 机械性能 耐油性能 

分 类 号：TM215.2[一般工业技术—材料科学与工程]