一例飞机用关节轴承生产电镀废水处理工艺  

A project for treating the wastewater from electroplating of joint bearings for aircraft

作　　者：郑璐嘉 ZHENG Lujia(School of Petrochemical Engineering,Zhangzhou Institute of Technology,Zhangzhou 363000,China;Fujian Collaborative Innovation Center of Fine Chemicals,Zhangzhou 363000,China)

机构地区：[1]漳州职业技术学院石油化工学院,福建漳州363000 [2]福建省精细化工应用技术协同创新中心,福建漳州363000

出　　处：《电镀与涂饰》2023年第23期78-84,共7页Electroplating & Finishing

基　　金：福建省自然科学基金(2020J01132)。

摘　　要：对飞机用关节轴承的电镀废水进行分类收集和分质处理,主要处理方法为化学沉淀法和生化法。采用该工艺处理后,总铬、六价铬和总锌的去除率分别为76.7%、100%和98.7%,出水水质满足《电镀污染物排放标准》(GB 21900-2008)表2和《污水综合排放标准》(GB 8978-1996)三级的要求。The wastewater generated during the electroplating of joint bearings for aircraft was collected in categories and treated by chemical precipitation and biochemical method.After being treated by the given process,the removal rates of total chromium,hexavalent chromium,and total zinc reached 76.7%,100%,and 98.7%,respectively.The quality of effluent meets the demand of the Table 2 stipulated in GB 21900-2008 Emission Standard of Pollutants for Electroplating and the Grade III of GB 8978-1996 Integrated Wastewater Discharge Standard.

关 键 词：关节轴承 电镀污水 化学沉淀 生化法 

分 类 号：X703.1[环境科学与工程—环境工程]