TiB_(w)/TA15钛基复合材料真空钎焊界面组织及性能研究  

Microstructure and properties of vacuum brazing interface of TiB_(w)/TA15 titanium matrix composites

作　　者：叶嘉宝 李晓红 邓云华 谢志怡 文彦臻 Ye Jiabao;Li Xiaohong;Deng Yunhua;Xie Zhiyi;Wen Yanzhen(Aeronautical Key Laboratory for Welding and Joining Technologies,AVIC Manufacturing Technology Institute,Beijing 100024,China)

机构地区：[1]中国航空制造技术研究院,航空焊接与连接技术航空科技重点实验室,北京100024

出　　处：《机械制造文摘（焊接分册）》2023年第5期33-41,共9页Welding Digest of Machinery Manufacturing

摘　　要：采用Ti-Zr-Cu-Ni钎料对TiB_(w)/TA15钛基复合材料进行真空钎焊,对不同工艺参数下钎焊接头组织及性能进行分析。结果表明,钎焊界面主要由针状的α-Ti相、间隙β-Ti相及Ti_(2)(Cu,Ni)金属间化合物及TiB w增强相组成。随着钎焊温度(920~980℃)和保温时间(60~150 min)的增加,针状α-Ti相占比增加,金属间化合物减少,TiB_(w)分布趋于均匀,接头力学性能增加。但较长的保温时间导致界面宽度增加,使接头整体塑性下降。钎料添加量较少且适宜的情况下,钎焊温度980℃,保温时间90 min下能获得最佳力学性能。TiB_(w)/TA15 titanium matrix composites were vacuum brazed by Ti-Zr-Cu-Ni brazing filler metals,and the microstructure and mechanical properties of the brazed interface were analyzed with different process parameters.The results show that the brazed interface was mainly composed of acicularα-Ti phase,interstitialβ-Ti phase,Ti_(2)(Cu,Ni)intermetallic compounds and TiB_(w) reinforcing phase.With the increase of brazing temperature(920~980℃)and holding time(60~150 min),the proportion of acicularα-Ti phase increased,the intermetallic compounds decreased,and the distribution of TiB_(w) tends to be uniform,and the mechanical properties of the joint increase.However,longer holding time will lead to the increase of brazing interface width and the decrease of joint plasticity.When the amount of filler metal is small and appropriate,brazing temperature 980℃,holding time 90 min can obtain the best mechanical properties,maintain good elongation after fracture.

关 键 词：钛基复合材料 真空钎焊 钎焊接头 界面组织 工艺参数 

分 类 号：TG454[金属学及工艺—焊接]