铝热轧带材表面振纹产生的原因与改善措施  

Cause of surface chatter marks of aluminum hot rolled strip and improvement measures

作　　者：路纪轩 章国华 孔军 黄东海 陈现德 王绎潭 陈金森 LU Jixuan;ZHANG Guohua;KONG jun;HUANG Donghai;CHEN Xiande;WANG Yitan;CHEN Jinsen(Houghton(Shanghai)Specialty Industrial Fluids Co.,Ltd.,Quaker Houghton Group,Shanghai 201613,China;Zhejiang Yongjie Aluminum Co.,Ltd.,Hangzhou 311222,China;Shanghai Huafeng Aluminum Co.,Ltd.,Shanghai 201613,China)

机构地区：[1]奎克好富顿集团好富顿(上海)高级工业介质有限公司,上海201613 [2]浙江永杰铝业有限公司,浙江杭州311222 [3]上海华峰铝业有限公司,上海201613

出　　处：《轻合金加工技术》2023年第10期27-30,共4页Light Alloy Fabrication Technology

摘　　要：1+3铝热连轧机生产的带材表面出现振纹,影响产品质量。根据振纹的特征并结合轧机的振动机理,确定振纹是由轧机的垂振现象引起的。分析了影响垂振的设备、工艺润滑、控制系统等因素,发现当卷取速度为1.1 m/s~1.4 m/s时,力的相互耦合触发轧机自激振动。通过优化带材中间坯轧制速度、轧制温度、乳液喷射压力、喷射流量及喷射模式,控制带材卷取速度,避开1.1 m/s~1.4 m/s卷取速度区间,消除了带材表面振纹。Chatter marks appear on the surface of strip produced by 1+3 aluminum hot rolling mill,which affects the product quelity.Based on the marks characteristics and the vi⁃bration mechanism of the rolling mill,it is determined that the chatter mark is caused by the vertical vibration phenomenon of the rolling mill.The article analyzes the factors such as e⁃quipment,process lubrication,and control system that affect vertical vibration.The results show that when the coiling speed is 1.1 m/s-1.4 m/s,the mutual coupling of forces trig⁃gers the self⁃excited vibration of the rolling mill.By optimizing the rolling speed and rolling temperature of the transfer bar,emulsion spray pressure,spray flow and spray pattern,the strip coiling speed is controlled to avoid the coiling speed range of 1.1 m/s~1.4 m/s,thus eliminating the strip surface chatter marks.

关 键 词：带材表面 振纹频率 垂振 自激振动 

分 类 号：TG146.21[一般工业技术—材料科学与工程]