考虑韧性损伤的Ti6554电塑性本构模型建立及应用  

Establishment and application of electroplastic constitutive model of Ti6554 considering ductile damage

在线阅读下载全文

作  者:时文才 武川 周宇杰 王园园 彭志伟 SHI Wen-cai;WU Chuan;ZHOU Yu-jie;WANG Yuan-yuan;PENG Zhi-wei(National-local Joint Engineering Laboratory of Intelligent Manufacturing Oriented Automobile Die&Mould,Tianjin University of Technology and Education,Tianjin 300222,China)

机构地区:[1]天津职业技术师范大学汽车模具智能制造国家地方联合工程试验室,天津300222

出  处:《塑性工程学报》2023年第12期175-183,共9页Journal of Plasticity Engineering

基  金:国家自然科学基金面上资助项目(52075386);中国博士后科学基金面上资助项目(2020M672309);天津市自然科学基金多投入重点项目(22JCZDJC00650);天津市教委科研项目(2020KJ107);陕西省高性能精确成形技术与装备重点实验室开放课题(PETE2019KF02)。

摘  要:建立了修正Johnson-Cook电塑性本构模型,使用FORTRAN语言开发了用户硬化子程序UHARD,并耦合指数形式的韧性损伤断裂准则,使用ABAQUS有限元软件进行了数值模拟。为验证本构模型与有限元模型的合理性,设计了脉冲电流辅助单向拉伸实验,通过控制脉冲电源的频率、占空比以及试验机的拉伸速度,分别在12、13和15 A·mm^(-2)电流密度下对Ti6554试样进行拉伸,直至断裂。结果表明,模拟与实验的载荷-位移、温度-时间曲线吻合情况良好,试样在15 A·mm^(-2)电流密度下的流动应力较小,温度攀升较缓,颈缩区域更广,颈缩现象提前发生,材料刚度退化最慢,最后通过扫描电子显微镜观察了3种电流密度下试样的断口形貌,发现试样均为韧性断裂。The modified Johnson-Cook electroplastic constitutive model was established,user hardening subroutine UHARD was developed using FORTRAN language,the exponential ductile damage fracture criterion was coupled,and the numerical simulation was carried out using ABAQUS finite element software.To verify the rationality of the constitutive model and the finite element model,pulsed current assisted uniaxial tensile experiments were designed.By controlling the frequency and duty ratio of the pulse power supply and the tensile speed of the testing machine,the Ti6554 samples were tensioned until fractured at the current density of 12,13 and 15 A·mm^(-2),respectively.The results show that the load-displacement and temperature-time curves of the simulation and experiments are in good agreement.With the current density of 15 A·mm^(-2),the flow stress of the sample is small,the temperature rises slowly,the necking area is wider,the necking phenomenon occurs in advance,and the stiffness degradation of the material is the slowest.Finally,scanning electron microscope(SEM)was used to observe the fracture morphologies of the samples with three kinds of current densities,and it is found that the samples are ductile fracture.

关 键 词:Ti6554钛合金 电塑性拉伸 损伤断裂 数值模拟 二次开发 

分 类 号:V252.2[一般工业技术—材料科学与工程]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象