Ti对低牌号无取向硅钢二次退火后铁损的影响  

Effect of Ti on iron loss of low grade nonoriented silicon steel after secondary annealing

作　　者：夏雪兰[1] 裴英豪[1] 祁旋 陈明侠 施立发[1] XIA Xuelan;PEI Yinghao;QI Xuan;CHEN Mingxia;SHI Lifa(Maanshan Iron and Steel Co.,Ltd.,Maanshan 243000,Anhui,China)

机构地区：[1]马鞍山钢铁股份有限公司,安徽马鞍山243000

出　　处：《金属功能材料》2023年第6期123-128,共6页Metallic Functional Materials

摘　　要：研究了不同Ti含量对质量分数为1.0%Si的无取向硅钢二次退火后铁损的影响。结果表明,随着Ti含量降低,二次退火前后铁损降低比例呈增加趋势,当Ti质量分数大于0.0012%时,铁损P1.5/50从4.531 W/kg降至3.807 W/kg,降低比例为15.97%,平均晶粒尺寸从23μm增加至40μm;而当Ti质量分数小于0.0012%时,铁损P1.5/50从4.328 W/kg降至3.444 W/kg,降低比例达20.43%,平均晶粒尺寸从28μm增加至56μm。The effects of different Ti contents on the iron loss of 1.0% Si non-oriented silicon steel after secondary annealing was studied.The results show that with the decrease of Ti content,the decrease of iron loss before and after secondary annealing shows an increasing trend.When the Ti content is more than 0.0012%,the iron loss Pl.5/5o decreases from 4.531 W/kg to 3.807 W/kg with a reduction of 15.97%,the average grain size increases from 23μm to 40μm;when the Ti content is less than 0.0012%,the iron loss P_(1.5/50) decreases from 4.328 w/kg to 3.444 W/kg with a reduction of 20.43%,and the average grain size increases from 28μm to 56μm。

关 键 词：无取向硅钢 二次退火 铁损 TI含量 

分 类 号：TG161[金属学及工艺—热处理]