检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:史鹏飞 马馨莹 向川 赵宏革 李渊 高仁璟[3] 刘书田[3] Shi Peng-Fei;Ma Xin-Ying;Xiang Chuan;Zhao Hong-Ge;Li Yuan;Gao Ren-Jing;Liu Shu-Tian(School of Marine Electrical Engineering,Dalian Maritime University,Dalian 116023,China;National Engineering Research Center of Fiber Optic Sensing Technology and Networks,Wuhan University of Technology,Wuhan 430070,China;State Key Laboratory of Structural Analysis,Optimization and CAE Software for Industrial Equipment,Dalian University of Technology,Dalian 116023,China)
机构地区:[1]大连海事大学船舶电气工程学院,大连116023 [2]武汉理工大学,光纤传感技术国家工程实验室,武汉430070 [3]大连理工大学,工业装备结构分析优化与CAE软件全国重点实验室,大连116023
出 处:《物理学报》2023年第24期281-289,共9页Acta Physica Sinica
基 金:国家自然科学基金(批准号:U1808215);湖北省教育厅科学研究计划指导项目(批准号:B2022620);深圳市科技计划(批准号:JSGG20200102155001779)资助的课题。
摘 要:对斜入射电磁波产生包含逆反射通道的双反射通道,对于提高目标识别性能、导航性能等具有重要意义.在双通道反射中,控制逆反射与镜像反射占比则是实现反射功率分配的关键.为实现双通道反射功率占比的可控,本文提出了一种双通道反射超表面微结构拓扑优化设计方法.构建了包括逆反射的双通道反射超表面实现机理及物理模型,建立了具有特定逆反射与镜像反射幅值比值或占比的超表面微结构拓扑优化模型.作为数值算例,针对TE模式下频率为10 GHz俯仰角-30°方向入射平面波,对逆反射与镜像反射功率比1∶1的双通道反射器进行设计,所设计超表面在±30°方向表现出较强的方向性,两方向反射幅值大小相等.同时,对具有最大逆反射占比的反射超表面进行设计,逆反射功率占总功率比值为0.093,无镜像反射及其他方向奇异反射,超表面强反射集中在-30°,主波束功率占总反射功率比为0.900.仿真及实验测试结构均验证了所提方法的可行性.For oblique incident electromagnetic waves,the generation of double reflection channels including retroreflection channel is of great significance in improving target recognition performance and navigation performance.In double channel reflection,controlling the ratio of retroreflection to specular reflection is the key to realizing reflection power distribution.In order to realize the control of the proportion of the reflected power in each channel,a topology optimization method for designing the reflective metasurface microstructure with dual channel is proposed in this paper.The implementation mechanism is investigated,physical model of metasurface with dual reflection channel including retroreflection channel is established,and the topology optimization model of metasurface microstructure with specific power ratio of the retroreflection to specular reflection is established.As a numerical example,a dual channel metasurface reflector with a 1∶1 ratio of retroreflection power to specular reflection power is designed for a 10 GHz plane wave in the TE mode with a pitch angle of-30°.The designed metasurface exhibits strong directionality in the retroreflective direction,and the reflection amplitudes in both directions are similar.The retroreflective metasurface with the maximum retroreflection ratio is designed.The retroreflection ratio of the designed metasurface is 0.093.There is no specular reflection or other singular reflection,and the strong reflection on the metasurface is concentrated at-30°.The ratio of the main beam power to the total reflection power is 0.900.The simulated and experimental results verify the feasibility of the proposed method.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.170