检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘传生 史利梅 陈海燕 LIU Chuansheng;SHI Limei;CHEN Haiyan(Research Institute of SINOPEC Yizheng Chemical Fibre Co.,Ltd.,Yizheng 211900)
机构地区:[1]中国石化仪征化纤有限责任公司研究院,江苏仪征211900
出 处:《合成纤维工业》2023年第6期34-37,共4页China Synthetic Fiber Industry
摘 要:将皮层为低熔点聚对苯二甲酸乙二醇酯(PET)、芯层为常规PET的低熔点复合纤维在100~180℃下热处理时间40 min,研究热处理温度对复合纤维干热收缩率的影响;将低熔点复合纤维按一定比例和常规涤纶混合、开松,混合纤维于100~180℃下热处理时间40 min,研究不同热处理温度和低熔点复合纤维含量对混合纤维黏结性能的影响。结果表明:低熔点复合纤维的单纤维及多纤维的干热收缩率均随热处理温度的升高而增大,在热处理温度160℃时可获得较稳定的干热收缩率,单纤维干热收缩率为14.5%,多纤维干热收缩率为34.1%;随热处理温度的提高及低熔点复合纤维含量的增加,混合纤维的黏结性能均增强,综合考虑混合纤维的黏结性能及使用性能,较佳热处理工艺为低熔点复合纤维质量分数20%、热处理温度160℃、热处理时间40 min。Low-melting point composite fibers with low-melting point polyethylene terephthalate(PET)as the sheath layer and conventional PET as the core layer were exposed to heat treatment at 100-180℃for 40 min.The effect of heat treatment temperature on dry heat shrinkage of low-melting point composite fibers were studied.The low-melting point composite fibers were mixed and loosen with conventional polyester fibers at a certain proportion to produce mixed fibers which were heat treated at 100-180℃for 40 min.The effects of different heat treatment temperatures and low-melting point composite fiber content on the bonding property of the mixed fibers were studied.The results showed that the dry heat shrinkage of single and multiple low-melting point composite fiber increased with the elevation of heat treatment temperature,and the stable dry heat shrinkage can be obtained at a heat treatment temperature of 160℃,14.5%for single fiber and 34.1%for multiple fiber;the bonding property of the mixed fibers was enhanced with the increase of heat treatment temperature and the content of low-melting point composite fibers;and taking into account the bonding property and service performance of the mixed fibers,the optimal heat treatment conditions were determined as followed:20%low-melting point composite fibers by mass fraction,heat treatment temperature 160℃and heat treatment time 40 min.
关 键 词:聚对苯二甲酸乙二酯纤维 低熔点复合纤维 热处理 干热收缩率 黏结性能
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:13.59.198.133