检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:胡祥龙 谭时雨 潘成 赵焕 张明喻 倪娟 HU Xiang-long;TAN Shi-yu;PAN Cheng;ZHAO Huan;ZHANG Ming-yu;NI Juan(Advanced Corporation for Materials&Equipment,Changsha 410199,China;State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410012,China)
机构地区:[1]湖南顶立科技股份有限公司,长沙410199 [2]中南大学粉末冶金国家重点实验室,长沙410012
出 处:《炭素》2023年第3期1-7,41,共8页Carbon
摘 要:本文以细编穿刺毡为预制体,通过聚合物浸渍一裂解法(PIP)和化学气相沉积法(CVD)相结合的工艺,制备了密度为1.95g/cm^(3)的C/C-SiC复合材料,并沿不同方向加工出标准测试件和规格为M10、M8、M6的螺栓连接件。利用扫描电子显微镜(SEM)和X射线衍射仪(XRD)对材料的微观形貌及结构进行表征,并对测试件和螺栓的力学性能进行分析。结果表明,沿平行于纤维方向(平行方向)加工的测试件具有更优的力学性能。螺栓连接件的抗拉强度与其规格及螺母数量有关,沿平行于纤维方向加工的M8螺栓和双螺母的配合具有最佳的抗拉强度,为140.2MPa,而剪切强度三种螺栓基本相同,约为60MPa。In this paper,a fine-woven punched felt was used as a preform to prepare a C/C-SiC composite with a density of 1.95 g/cm^(3).The preparation process involved a combination of polymer impregnation-pyrolysis(PIP)and chemical vapor deposition(CVD).Standard test parts and bolt connectors of M10,M8,and M6 specifications were processed in different directions.Scanning electron microscopy(SEM)and X-ray diffractometry(XRD)were employed to characterize the microscopic morphology and structure of the material.Furthermore,the mechanical properties of the test pieces and bolts were analyzed.The results indicate that test pieces processed parallel to the fiber direction exhibit superior mechanical properties.The tensile strength of bolted connectors is dependent on their specifications and the number of nuts.Notably.the combination of an M8 bolt and double nut machined parallel to the fiber direction demonstrates the highest tensile strength at 140.2 MPa.Additionally,the shear strength of the three types of bolts is approximately 60 MPa.
分 类 号:TB332[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.124