检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘畅 夏羿 彭星杰 赵文斌 宋霁阳 金帅 刘润麒 何宇豪 Liu Chang;Xia Yi;Peng Xingjie;Zhao Wenbin;Song Jiyang;Jin Shuai;Liu Runqi;He Yuhao(Nuclear Power Institute of China,Chengdu,610213)
出 处:《核动力工程》2023年第S02期184-187,共4页Nuclear Power Engineering
基 金:中核集团青年英才项目(K301007041)。
摘 要:针对高通量工程试验堆(HFETR)内的某特定辐照装置进行研究分析。采用蒙特卡洛程序描述不同材料在不同轴向高度处的释热情况,利用STAR-CCM+程序建立了热工模型,并通过实测数据验证了模型的准确性,在给定工况下,热电偶测点温度计算值与实测值的偏差为2.3%。研究发现,在不考虑辐照装置堵头组件短管径向位置和轴向位置变化的情况下,通过改变热电偶的数量和排布,可能会在低温差流动换热过程中引起1%~4%的温度测量偏差。本文研究揭示了辐照装置中低温差流动换热过程的测量偏差问题,可以为提高温度测量的准确性,以及HFETR安全运行和工程设计提供关键的参考依据。In this paper,a specific irradiation device in the High Flux Engineering Test Reactor(HFETR)is studied and analyzed.The Monte Carlo code is used to describe the heat release of different materials at different axial heights.The thermal model is established by using the code STAR-CCM+,and the accuracy of the model is verified by the measured data.Under given conditions,the deviation between the calculated temperature of thermocouple measuring point and the measured value is 2.3%.It is found that the temperature measurement deviation of 1%-4%may be caused in the process of low temperature differential flow heat transfer by changing the number and arrangement of thermocouples without considering the radial and axial position changes of the short tube of the plug assembly of the irradiation device.In this paper,the measurement deviation of low temperature difference flow heat transfer process in irradiation device is revealed,which can provide a key reference for improving the accuracy of temperature measurement and the safe operation and engineering design of HFETR.
关 键 词:辐照装置 低温差流动换热 蒙特卡洛方法 STAR-CCM+ 测量偏差
分 类 号:TK124[动力工程及工程热物理—工程热物理] TL333[动力工程及工程热物理—热能工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.179