毛衫绞花织物的三维仿真与实现  

Three-dimensional simulation and realization of sweater cabled fabrics

作　　者：赵俊杰 蒋高明[1] 程碧莲 李炳贤 ZHAO Junjie;JIANG Gaoming;CHENG Bilian;LI Bingxian(Engineering Research Center for Knitting Technology,Ministry of Education,Jiangnan University,Wuxi,Jiangsu 214122,China)

机构地区：[1]江南大学针织技术教育部工程研究中心,江苏无锡214122

出　　处：《纺织学报》2023年第12期81-87,共7页Journal of Textile Research

摘　　要：为降低毛衫绞花织物的设计与研发成本,实现绞花织物的快速设计与仿真,在深入研究横编绞花织物组织结构的基础上,基于绞花组织的编织原理与编织方法,将形成绞花织物的各线圈结构与编织动作转换成具有颜色信息和编织信息的色码,提出了花型意匠图数学模型和组织结构图数学模型,并探讨这2个模型之间的展开关系得到织物的工艺编织图矩阵。再结合绞花织物各线圈结构特点,建立理想状态下的线圈结构几何模型,确定线圈各型值点的位置,并对不同移针方向、移针行数和移针线圈数的移圈线圈进行分析,得出移圈线圈型值点变化规律。借助C#编程语言实现横编绞花组织的三维结构仿真,对绞花组织的设计与开发具有理论和实际的指导意义。Objective The loop-transfer cable stitch is the main structure that forms the surface texture effect of the flat knitted sweater product,and its application is very extensive.Achieving the rapid design and three-dimensional structure simulation of the cable fabrics to facilitate quick prediction of the fabric effect of the cabled fabrics is of great significance to reduce the design and development cost of cable-knitted sweater fabrics.Method Based on the knitting principle and knitting method of the cable stitch,the knitting action was parameterized,and the mathematical models for the pattern and for the knitting structure diagram were proposed.Combined with the structural characteristics of each loop of the cable fabrics,an ideal loop model was established,and the trajectory of the value point for the transfer loop was analyzed.Finally,C#and WebGL were used to program the three-dimensional structure simulation of the flat knitted cable fabric.Results The pattern matrix model and the minimum structure unit matrix were established by the minimum pattern cycle of the cable fabric,and the block matrix F A of the expanded pattern was established according to the color value of the pattern matrix.Then the relationship between the block matrix F A and the structure diagram matrix in the pattern diagram matrix was obtained in combination with Equation 4,and the process knitting diagram matrix model of cable fabric was obtained by replacing the matrix elements,see Equation 5.The loop of transferred was based on the normal flat needle loop knitting,and the needle was transferred through the needle bed traversing to transfer the needle arc to form the loop tilt effect.A loop geometry model based on the normal flat needle loop geometry model showed that transfers one needle to the right,based on the establishment of the loop type value point and the loop root junction point(Fig.4).The coordinates of the 4 type value points near the root junction point of the transfer loop remain basically unchanged,and the coordinates of t

关 键 词：绞花织物 花型设计 线圈结构模型 三维仿真 毛衫 

分 类 号：TS186.2[轻工技术与工程—纺织材料与纺织品设计]