检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈国庆 董雨轩 李志刚[2] 李军[2] CHEN Guoqing;DONG Yuxuan;LI Zhigang;LI Jun(State Key Laboratory of Clean and Eficient Coal fired Power Generation and Pollution Control,National Energy Group Science and Technology Research Instiute Co,Ltd.,Nanjing Jiangsu,210023;Institute of Turbomachinery,Xi an Jiaotong University,Xi'an Shaanxi,710049)
机构地区:[1]清洁高效燃煤发电与污染控制国家重点实验室,国家能源集团科学技术研究院有限公司,江苏南京210023 [2]西安交通大学叶轮机械研究所,陕西西安710049
出 处:《东方汽轮机》2023年第4期36-44,共9页Dongfang Turbine
摘 要:为提升燃气轮机排气扩压器的气动性能,文章设计了一种变截面弯扭锥形支撑板。采用数值求解三维Reynolds-Averaged Navier-Stokes(RANS)的方法在两种进气旋流角条件下对比分析了原始结构支撑板和变截面弯扭锥形支撑板对排气扩压器气动性能的影响。研究表明:进气旋流角为16°和28°时,与原始结构支撑板相比,变截面弯扭锥形支撑板一方面通过其后掠锥形设计使得气流对支撑板前缘的冲击沿轴向逐渐发生,另一方面通过前缘的弯度设计减小了相对进气攻角,使得排气扩压器内流动分离减弱,进而减小排气扩压器的总压损失系数。进气旋流角为28°时,变截面支撑板还可以显著增加排气扩压器的动压转化系数。变截面支撑板在进气旋流角分别为16°和28°时使得排气扩压器的静压恢复系数相对提升4.8%和30%。所提出的变截面弯扭锥形支撑板有效提升了排气扩压器的静压恢复性能。To improve the aerodynamic performance of the gas turbine exhaust diffuser,a twisted and tapered strut with a variable cross-section is designed in this paper.The effects of the original strut and the variable cross-section strut on the aerodynamic performance of the gas turbine exhaust diffuser are comparatively analyzed by numerically solving the three-dimensional Reynolds-Averaged Navier-Stokes(RANS)method at two inlet swirl angles.The study shows that:when the inlet swirl angle is 16°and 28°,compared with the original strut,The variable cross-section strut,on the one hand,makes the impact of the airflow on the leading edge of the strut occur gradually in the axial direction by its swept-back design,and on the other hand,reduces the relative inlet angle of attack by the curvature of the leading edge,which makes the flow separation in the exhaust diffuser weaker,and thus reduces the total pressure loss coefficient of the exhaust diffuser.At an inlet swirl angle of 28°,the variable cross-section strut can also significantly increase the dynamic pressure conversion coefficient of the exhaust diffuser.The static pressure recovery coefficients of the exhaust diffuser with the variable-section strut are relatively increased by 4.8%and 30%at inlet swirl angles of 16°and 28°,respectively.The proposed twisted and tapered strut with variable cross-section effectively improves the static pressure recovery performance of the exhaust diffuser.
分 类 号:TK471[动力工程及工程热物理—动力机械及工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.17.156.114