Design and test of the motion system for HEPS storage ring horizontal collimator  

作　　者：Liuxu Zong Haijing Wang Chunhua Li Guangyi Tang Huamin Qu Shang Lu 

机构地区：[1]Institute of High Energy Physics,Chinese Academy of Science,Beijing,100049,China [2]University of Chinese Academy of Science,Beijing,100049,China

出　　处：《Radiation Detection Technology and Methods》2023年第4期484-492,共9页辐射探测技术与方法（英文）

基　　金：supported by Key Laboratory of Particle Acceleration Physics&Technology,Institute of High Energy Physics,Chinese Academy of Sciences[JSQ2020ZZ05].

摘　　要：Background Collimators in the storage ring of high-energy photon source(HEPS)are used to localize the beam loss,making it possible to set local radiation shields.The motion system of the collimator is used to adjust the position of the movable jaws for controlling the beam loss precisely.Moreover,dump mode of the collimator increases the risk of jaw damage from beam heat deposition.According to the requirements of motion accuracy and the severe working condition of the collimators,a new design of a two-axis motion system for the movable jaws is proposed,realizing high-precision control and extending the lifetime.Purpose The purpose of this paper is to introduce the designing scheme of the motion system for HEPS storage ring horizontal collimators,including the analyses of the key components,the structure design of the motion system and test results of the prototype.Method Temperature excursions of the movable jaw are calculated theoretically and analyzed by ANSYS,respectively.The motion accuracy of the system is measured by coordinate measuring machine.Result The temperature excursion is simulated as 1883 K while using graphite as the absorbing material at dump mode.The motion system consists of a mobile slide for aperture adjustment and a manual wedge jack for vertical adjustment.The average coupled deviation in horizontal direction of the wedge jack is 0.031 mm,while the maximum positioning deviation of the slide is 0.014 mm,both having good repeatability and being compensable.Conclusion Test results of the prototype indicate that the new design of the motion system is applicable to the horizontal collimator in HEPS storage ring.The problem of the jaw rotation in the horizontal movement is found,and the solution is given.

关 键 词：COLLIMATOR Dump mode Structure design Motion accuracy 

分 类 号：O57[理学—粒子物理与原子核物理]