采用单片机的引信装定信息传输设计的仿真研究  

Simulation research of fuze setting information transmission design using single chip microcomputer

作　　者：杨梦婷 赵晓尧 YANG Mengting;ZHAO Xiaoyao(School of Mechatronics Engineering,North University of China,Taiyuan 030051,China)

机构地区：[1]中北大学机电工程学院,太原030051

出　　处：《兵器装备工程学报》2023年第S02期153-157,共5页Journal of Ordnance Equipment Engineering

摘　　要：为了简化引信装定信息传输的仿真过程,根据电磁感应原理,设计了一种用于电子时间引信装定信息的电磁感应装定器,该装定器以AT89C52单片机最小电路为主控单位,分别连接按键模块、显示模块和串口输出模块,通过Proteus和Keil软件搭建电路、设计程序并仿真调试。结果表明,设计的电磁感应装定器可以将装定信息输入、显示并传输到引信上,成功验证了Proteus和Keil软件在电子引信设计应用可行性,设计效率提高,验证成本降低,实现了无实物可视化。In order to simplify the simulation process of fuze setting information transmission,according to the principle of electromagnetic induction,this paper designed an electromagnetic induction setting device for electronic time fuze setting information using AT89C52 single chip microcomputer.The setting device took the smallest circuit of the single chip microcomputer as the main control unit,and connected the key module,the display module and the serial output module respectively.Proteus and Keil software were used to build the circuit,design the program and simulate the debugging.The results showed that the designed electromagnetic induction setting device can input,display and transmit the setting information to the fuze,which successfully verified the feasibility of the application of Proteus and Keil software in the design of electronic fuze,improved the design efficiency,reduced the verification cost,and realized the non-physical visualization.

关 键 词：电子时间引信 电磁感应装定 单片机 PROTEUS KEIL 

分 类 号：TJ433.3[兵器科学与技术—火炮、自动武器与弹药工程]