加氢尾油裂解制乙烯的工艺条件优化  

Process Optimization of Ethylene Production from the HVGO Cracking

作　　者：胡文学 阿依努尔·阿布力孜 HU Wenxue;AYINUERAbulizi

机构地区：[1]阿拉善职业技术学院化工系,内蒙古阿拉善盟750306 [2]新疆中昆新材料有限公司化验中心,新疆库尔勒841000

出　　处：《化工设计通讯》2024年第1期34-36,共3页Chemical Engineering Design Communications

摘　　要：为寻找加氢尾油裂解制乙烯的最佳工艺条件,分别考察裂解温度、水油比及进料流速对乙烯收率的影响,结果发现最佳工艺条件:裂解温度为855℃、水油比为0.8、进料流速为194.00 g/h,在最佳工艺条件下乙烯收率可达25.48%。In order to study the optimal cracking process conditions to produce ethylene,the effects of cracking temperature,water-oil ratio and feed velocity on ethylene yield were investigated respectively.The results showed that the optimal process conditions were cracking temperature was 855℃,water-oil ratio was 0.8,and feed velocity was 194.00 g/h.Under these conditions,the ethylene yield was 25.48%.

关 键 词：加氢尾油 乙烯 裂解温度 水油比 进料流速 

分 类 号：TE626[石油与天然气工程—油气加工工程]