检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王哲[1,2] 刘鹏 陈婧[1] 黄广炎[1,2] 张宏[1,2] WANG Zhe;LIU Peng;CHEN Jing;HUANG Guangyan;ZHANG Hong(State Key Laboratory of Explosive Science and Technology,Beijing Institute of Technology,Beijing 100081,China;Laboratory of Modern Weapon Technology,Beijing Institute of Technology Chongqing Innovation Center,Chongqing 401120,China)
机构地区:[1]北京理工大学爆炸科学与技术国家重点实验室,北京100081 [2]北京理工大学重庆创新中心现代兵器技术实验室,重庆401120
出 处:《兵工学报》2024年第1期35-43,共9页Acta Armamentarii
基 金:国家自然科学基金项目(12002051);爆炸科学与技术国家重点实验室项目(QNKT21-4);重庆自然科学基金项目(cstc2021jcyj-msxmX0666)。
摘 要:芳纶凭借其轻质高强的特点广泛应用于防弹领域。为提高单层芳纶织物的抗钝伤能力,采用热塑性树脂聚乙烯(Polythene,PE)与石墨烯纳米粒子表面改性方法提升芳纶织物的抗钝伤性能。以背衬凹陷为标准,对不同质量配比改性芳纶织物的抗钝伤能力和能量吸收特性进行测试对比。对比结果表明:石墨烯和PE两种改性方法均可提升芳纶织物的抗钝伤能力,其中PE改性方法使得改性织物面密度增加较小但抗钝伤能力显著提升,10%PE的防弹能力和比吸能值较纯芳纶分别提升了18.0%和30.8%;石墨烯改性织物刚性的增加使其低速抗钝伤能力增强,但是过大的纱线间摩擦使其高速防护能力减弱,2%石墨烯粉体为石墨烯改性织物的最佳配比。此外,优化验证得到了2层10%PE和13层的6层正交超高分子量PE无纬布防弹衣组合设计。Aramid is widely used in the field of ballistic protection due to its light weight and high strength.In order to improve the trauma resistance of single-layer aramid fabrics,the surface modification methods of thermoplastic resin polyethylene(PE)and graphene nanoparticles(GR)are used innovatively to improve the ballistic performance of aramid fabrics.The trauma resistance and energy absorption of modified aramid fabrics with different mass ratios are studied based on the backface significance(BFS).The results show that both graphene and polyethylene modification methods can improve the blunt trauma resistance.The surface density of the modified fabric is increased slightly by polyethylene modification,but the resistance to blunt injury is significantly improved.Compared with pure aramid fabric,the bullet-proof ability and specific energy absorption value of 10%PE are increased by 18.0%and 30.8%,respectively.The increased rigidity of graphene-modified fabric increases its resistance to blunt injury at low speed,but the excessive inter-yarn friction weakens its resistance to blunt injury at high speed.2%GR is the best ratio for graphene-modified fabric.In addition,the combined design of body armor with 2 layers of 10%PE and 13 layers of six layers of orthogonal UHMWPE unidrectional fabric is obtained through optimization and verification.
关 键 词:改性芳纶织物 钝伤防护 背衬凹陷 防弹性能 能量吸收
分 类 号:TJ012.4[兵器科学与技术—兵器发射理论与技术] TB332[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:52.15.66.233