树脂渗透剂的制备及其后处理对3DP成型件抗压性能的影响  

Preparation of Resin Infiltrant and the Effects of Its Post-processing on the Compressive Properties of 3DP Formed Parts

作　　者：胡彦萍 张捷 吴伟伟[3] HU Yanping;ZHANG Jie;WU Weiwei(School of Compressive Engineering,Lanzhou Petrochemical University of Vocational Technology,Lanzhou 730060,China;School of Compressive Engineering,Nantong Institute of Technology,Nantong 226002,China;School of Compressive Engineering,Yangzhou University,Yangzhou 225127,China)

机构地区：[1]兰州石化职业技术大学机械工程学院,甘肃兰州730060 [2]南通理工学院机械工程学院,江苏南通226002 [3]扬州大学机械工程学院,江苏扬州225127

出　　处：《塑料工业》2024年第1期86-92,153,共8页China Plastics Industry

基　　金：江苏省高校自然科学基金项目(22KJB460040)。

摘　　要：在利用三维粉末黏结(3DP)工艺成型标准圆柱件时,为了制备3DP工艺后处理环节所需的树脂渗透剂,以抗压强度为指标,利用响应面法中的Box-Behnken设计了实验方案,确定了优化配比方案。以此为后处理剂扫描电子显微镜(SEM)、能谱仪(EDS)和抗压强度测试讨论了渗透参数(渗透次数、渗透方式以及渗透间隔时间)对3DP工艺成型件的抗压性能的影响。结果表明,制备的树脂渗透剂可有效改善成型件的抗压性能。在渗透处理时,采用浸润的渗透形式,通过多次浸润、渗透间隔时间逐次递增的方式,可以有效提高成形件的抗压性能。When molding the standard cylinder parts by using the three dimensional power bonding(3DP)technology,in order to prepare the coating quick drying agent required for the post-processing process of 3DP technology,an experimental scheme was designed using Box-Behnken in response surface methodology,with compressive strength as the indicator,and the optimized ratio scheme was determined.As the post-treatment agent,the effects of penetration parameters(penetration frequency,penetration mode,and penetration interval time)on the compressive properties of 3DP process molded parts were discussed from both micro(SEM and EDS)and macro(compressive strength testing)perspectives.The results indicate that the prepared coating quick drying agent can effectively improve the compressive properties of the molded parts.During infiltration treatment,the compressive properties of the formed part can be effectively improved by using the infiltration form of multiple infiltration and increasing the infiltration interval time step by step.

关 键 词：树脂渗透剂 三维粉末黏结工艺 后处理 抗压性能 

分 类 号：TQ638[化学工程—精细化工]