检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王炎福 范伟军 胡晓峰 郭斌 WANG Yanfu;FAN Weijun;HU Xiaofeng;GUO Bin(College of Metrology and Measurement Engineering,China Jiliang University;Hangzhou Wolei Intelligent Sci-Tech Co.,Ltd)
机构地区:[1]中国计量大学计量测试工程学院 [2]杭州沃镭智能科技股份有限公司
出 处:《仪表技术与传感器》2024年第1期64-69,共6页Instrument Technique and Sensor
基 金:浙江省科技计划项目省级重点研发计划(2021C01136);浙江省公益性技术应用研究计划(LGG21E050019);杭州市重大科技创新项目(2022ATZD0112);温州市重大科技创新项目(ZG2022003)。
摘 要:在集成式电液制动系统耐久测试中,对于不同排液量的产品需更换不同的卡钳负载。针对这一问题,设计了缸体容积可调以适应不同需液量的模拟卡钳负载。基于仿真软件AMESim搭建了仿真模型,对其需液量-液压特性进行分析。基于CAN通讯研发了一套集成式电液制动系统耐久测试系统,对被测产品进行常规制动功和ABS等功能的耐久测试,负载机构通过球阀可以选择模拟卡钳装置或者实车卡钳。实验结果表明模拟卡钳负载可以满足被测产品进行耐久测试,且与卡钳负载对比后相差很小,符合厂商的测试需求。In the endurance test of integrated electro-hydraulic brake system,different caliper loads need to be replaced for products with different fluid discharges.To address this problem,a simulated caliper load with adjustable cylinder volume to adapt to different fluid demands was designed.A simulation model was built based on the simulation software AMESim to analyze its fluid demand-hydraulic characteristics,and then a set of integrated electro-hydraulic brake system endurance test system was developed based on CAN communication.The endurance test of conventional braking power,ABS and other functions of the tested product was carried out.The load mechanism can be selected from the simulated caliper device or the real car caliper through the ball valve.The experimental results show that the simulated caliper load can meet the endurance test of the product under test,and the difference between the load and the caliper is very small,which meets the testing requirements of the manufacturer.
关 键 词:模拟卡钳负载 仿真模型 耐久测试 集成式电液制动系统 管路系统
分 类 号:TP23[自动化与计算机技术—检测技术与自动化装置]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38