钼尾矿砂环氧树脂砂浆快速修补材料的性能研究  

Study on Properties of Epoxy Resin Mortar for Rapid Repair of Molybdenum Tailing Sand

作　　者：卢琛 张永刚 贾晓鹏 Chen;Zhang Yonggang;Jia Xiaopeng(Fujian Highway Development Center,Fuzhou,Fujian 350001;Zhonglu Construction(Beijing)Engineering Material Technology Co.Ltd.,Beijing 100176)

机构地区：[1]福建省公路事业发展中心,福建福州350001 [2]中路交建(北京)工程材料技术有限公司,北京100176

出　　处：《江西建材》2023年第11期63-66,共4页Jiangxi Building Materials

基　　金：福建省公路事业研究中心研究课题《水泥路面错台、啃边病害耐久性修补技术研究与应用》(项目编号:FJGC-GK-2022093)。

摘　　要：将钼矿开采与分选后排放的钼尾矿砂固体废弃物进行筛分,使其完全替代石英砂和矿粉作为砂骨料和细粉填料来制备环氧树脂砂浆。试验结果表明:以钼尾矿骨料替代石英砂后,钼尾矿填料的掺加提升了砂浆的流动性与力学性能;掺量为20%钼尾矿粉的环氧砂浆流动度为142 mm,1 d抗压强度和抗折强度分别为67、26 MPa;掺量为40%时环氧树脂砂浆与旧水泥砂浆的粘结性能最好。采用钼尾矿砂作为骨料和填料不仅能满足环氧砂浆作为修复材料的基本性能要求,还能提高钼尾矿固废的综合利用率。The solid waste of molybdenum tailings discharged after molybdenum mining and separation was screened,and it was used to completely replace quartz sand and mineral powder as sand aggregate and fine powder filler to prepare epoxy mortar.The test ersults show that after replacing quartz sand with molybdenum tailings aggregate,the fluidity and mechanical properties of mortar are imporved by adding molybdenum tailings filler The fluidity of epoxy mortar with 20%molybdenum tailings sand powder is 142 mm,and the compressive strength and flexural strength of epoxy mortar can reach 67、26 MPa;respectively in 1 day.When the content is 40%,the bonding performance between epoxy resin mortar and old cement mortar is the highes.t Using molybdenum tailings as aggregate and filler can not onyl meet the basic performance requirements of epoxy mortar as repair materail,but also improve the comprehensive utilization rate of molbydenum tailings solid waste.

关 键 词：环氧树脂砂浆 钼尾矿砂 力学性能 骨料 填料 

分 类 号：U414[交通运输工程—道路与铁道工程]