检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈力 廖传华[1] 王常青 CHEN Li;LIAO Chuan-hua;WANG Chang-qing(School of Mechanical and Power Engineering,Nanjing Tech University;Nanjing Sanfang Chemical Equipment Supervision Co.,Ltd.)
机构地区:[1]南京工业大学机械与动力工程学院 [2]南京三方化工设备监理有限公司
出 处:《化工机械》2024年第1期151-159,164,共10页Chemical Engineering & Machinery
摘 要:随着间歇性可再生能源的普及,储能系统在电网中发挥着关键作用。与空气储能系统相比,二氧化碳储能具有储能密度高、易液化、环境友好等优势。首先建立了一种液-液二氧化碳储能系统,然后利用Aspen Plus仿真软件对其储能过程进行建模分析,揭示了储能压力、释能压力、压缩机进口压力、节流阀压降、压缩机效率及膨胀机效率等参数变化对系统性能的影响。最后,对这种液-液二氧化碳储能系统进行了参数分析,得到系统最优工艺参数。同时对系统进行[火用]分析,得到[火用]损分布,分析讨论了系统产生[火用]损的内部原因。With the popularization of intermittent renewable energy,energy storage system plays a key role in the power grid.Compared with the air energy storage system,the carbon dioxide one has advantages of higher energy storage density,easy liquefaction,and environmental friendliness.In this paper,a liquid-liquid carbon dioxide energy storage system was established and Aspen Plus simulation software was used to model and analyze energy storage process.The influences from energy-storing pressure,energy-releasing pressure,compressor inlet pressure,throttle valve pressure drop,compressor efficiency,expander efficiency and other parameters on system performance were revealed.Finally,the parameters of this carbon dioxide energy storage system were analyzed to obtain optimal process parameters of the system.In addition,the system was analyzed to obtain Exergy loss distribution and causes thereof.
关 键 词:二氧化碳储能系统 热力学 参数优化 [火用]分析
分 类 号:TM73[电气工程—电力系统及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.118.147.65