中材电瓷绝缘子水泥胶合剂实验研究  

Research report on insulator cement adhesive for Zhongcai electric porcelain

作　　者：黎荣奎 陈志鹏 周剑飞 Li Rongkui;Chen Zhipeng;Zhou Jianfei(Silicate Research Institute of Pingxiang Comprehensive Inspection,Testing and Certification Institute,Pingxiang,337000,China;不详)

机构地区：[1]萍乡市综合检验检测认证院硅酸盐研究所,江西萍乡337000 [2]中材电瓷电气有限公司,江西萍乡337200 [3]江西省工业陶瓷质量监督检验站,江西萍乡337000

出　　处：《水泥工程》2023年第6期9-11,29,共4页Cement Engineering

摘　　要：本课题研究依托中材江西电瓷电气有限公司的智能化生产线建设项目,主要从水泥品种、缓凝剂种类、矿物掺合料用量等方面研究提高水泥胶合剂早期强度的方案。试验表明通过掺加缓凝剂和矿渣后,硫铝酸盐水泥更优于早强型硅酸盐水泥的综合性能;同时通过生产工艺的改进,使得胶合剂各组分计量准确,利用公司窑尾废气温度来提高养护室温度以提高胶合剂的早期强度,加快脱模速度,即可满足智能化生产线批量生产要求。This research project is based on the intelligent production line construction project of Sinoma Jiangxi Electric Porcelain Electric Co.,Ltd.It mainly studies methods to improve the early strength of cement adhesives from the aspects of cement variety,retarder type,mineral admixture dosage,etc.The experiment shows that by adding retarders and slag,the comprehensive performance of sulfoaluminate cement is better than that of early-strength Portland cement;At the same time,through the improvement of production process,the measurement of each component of the adhesive is accurate.By using the temperature of the company's kiln exhaust gas to increase the temperature of the curing room,the early strength of the adhesive is improved,and the demolding speed is accelerated,which can meet the requirements of intelligent production line batch production.

关 键 词：特高压绝缘子 水泥胶合剂 硫铝酸盐水泥 缓凝剂 配方优化 

分 类 号：TQ172.6[化学工程—水泥工业]