检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨仁贤 马澍成 蔡欣 郑雷刚[1] 胡小强[1,2] 李殿中 YANG Renxian;MA Shucheng;CAI Xin;ZHENG Leigang;HU Xiaoqiang;LI Dianzhong(Shenyang National Laboratory for Materials Science,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China;School of Materials Science and Engineering,University of Science and Technology of China,Shenyang 110016,China)
机构地区:[1]中国科学院金属研究所沈阳材料科学国家研究中心,沈阳110016 [2]中国科学技术大学材料科学与工程学院,沈阳110016
出 处:《材料研究学报》2024年第1期23-32,共10页Chinese Journal of Materials Research
基 金:国家重点研发计划(2020YFB2006800);中国科学院青年创新促进会优秀项目(Y2021060);沈阳市中青年科技创新人才支持计划项目(RC220474)。
摘 要:采用蠕变持久试验机、扫描电子显微镜和透射电子显微镜等实验手段,系统研究了Ce元素添加对316LN奥氏体不锈钢(316LN钢)高温蠕变行为和微观组织的影响。结果表明,添加0.032%的Ce元素使316LN钢的蠕变断裂寿命显著提高。在温度为700℃、载荷为150 MPa的条件下,添加0.032%Ce元素的316LN钢蠕变寿命为555.5 h,比不添加Ce元素时的蠕变寿命312.6 h提高了78%。在温度为600~700℃、载荷为150~200 MPa的条件下,未添加Ce元素和添加0.032%Ce元素的316LN钢对应的蠕变应力指数分别为7.64和9.07,蠕变激活能分别为415.3 kJ/mol和454.8 kJ/mol,蠕变门槛应力分别为61.7 MPa和76.6 MPa。蠕变断裂后的微观组织表明,添加0.032%的Ce元素显著促进了蠕变过程中316LN钢晶内Laves相的析出。晶内细小弥散分布的Laves相,在蠕变过程中能够阻碍位错移动,提高基体的蠕变抗力,从而有效改善蠕变性能。316LN austenitic stainless steel(316LN steel)is widely used as structural components in nuclear industries for their excellent corrosion resistance and high temperature mechanical properties.With the development of next-generation nuclear reactors,it is imperative to improve the high temperature creep properties of 316LN steel to warrant the corresponding components being subjected to higher temperatures.Alloying with rare earth(RE)elements,such as Cerium(Ce),are considered as a promising approach to enhance creep properties of the austenitic stainless steels.However,the effect of Ce on the microstructure evolution and creep performance of 316LN steel have not been reported.In this study,the effect of Ce on creep behavior and microstructure of 316LN steel in the temperature range 600oC to 700oC and stresses range150 MPa to 200 MPa was investigated by electronic creep tester,scanning electron microscopy(SEM)and transmission electron microscopy(TEM).The results show that the addition of 0.032%Ce could significantly improve the creep rupture life of 316LN steel.For instance,at 700oC/150 MPa,the creep life of 316LN steel with 0.032%Ce prominently increased from 313 h to 556 h.The creep stress exponent,activation energy and threshold stress of 316LN steel without Ce were found to be 7.64,415.3 kJ/mol and 61.7 MPa,respectively,whereas those of 316LN steel with 0.032%Ce addition were corresponding to 9.07,454.8 kJ/mol and 76.6 MPa.The creep mechanism of those two 316LN steels were also controlled by dislocation climbing.The addition of 0.032%Ce has not changed the creep mechanism of 316LN steel but clearly raised the creep activation energy and threshold stress.Furthermore,microstructural analysis demonstrates that the addition of 0.032%Ce may obviously promote the precipitation of Laves phase within the matrix.These intragranular Laves phases could inhibit the movement of dislocations during creep deformation,notably enhancing the creep resistance of the matrix.Therefore,the addition of 0.032%Ce remarkably improved the
关 键 词:金属材料 316LN奥氏体不锈钢 高温蠕变 稀土Ce 析出强化
分 类 号:TG142.1[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.14.252.84