弹簧支吊架荷载变化系数的选取与汽水管道支吊架优化设计  

Selection of load variation factor of spring hanger and optimization design of steam/water pipe support and hanger

作　　者：康豫军[1] 安付立[1] 吴晓俊[1] 程勇明[1] 孙克学 彭钰君 KANG Yujun;AN Fuli;WU Xiaojun;CHENG Yongming;SUN Kexue;PENG Yujun(Xi’an Thermal Power Research Institute Co.,Ltd.,Xi’an 710054,China;Huadian International Power Co.,Ltd.Fengjie Power Plant,Chongqing 404652,China)

机构地区：[1]西安热工研究院有限公司,陕西西安710054 [2]华电国际电力股份有限公司奉节发电厂,重庆404652

出　　处：《热力发电》2024年第2期192-198,共7页Thermal Power Generation

摘　　要：目前,我国火力发电厂汽水管道设计标准规定,弹簧吊架荷载变化系数不应大于25%,据此设计的管道系统恒力吊架比例过高,其荷载“非法”转移会造成管道偏离设计线运行,应力升高。分析了恒力吊架恒定度与荷载变化系数的关系并给出了优化设计案例,研究结果表明,在汽水管道设计中适当增大弹簧吊架荷载变化系数,可增大弹簧吊架配置占比,减少管道膨胀异常现象的发生。At present,China’s thermal power plant steam/water pipeline design standard stipulates that the load variation coefficient of spring hangers should not exceed 25%.Accordingly,the designed proportion of the constant support hanger is too high,and the“illegal”transfer of the load will cause the pipe operation deviates from the design line,and the stress increases.This paper analyzes the relationship between the constant degree and the load variability factor of constant hanger.The optimization design case shows that,properly increasing the load variation coefficient of spring hangers in the design of steam/water pipelines can increase the proportion of spring hanger configuration and reduce the occurrence of abnormal pipeline expansion.

关 键 词：弹簧吊架 荷载变化系数 恒力吊架 恒定度 管道支吊架优化设计 

分 类 号：TM621[电气工程—电力系统及自动化]