燃气调压器内置泄压元件分析与改进  

Analysis and Improvement of Built-in Pressure Relief Component in Gas Pressure Regulators

作　　者：郭胜兰 GUO Shenglan(Guangzhou Gas Group Co.,Ltd.)

机构地区：[1]广州燃气集团有限公司

出　　处：《上海煤气》2024年第1期13-15,共3页Shanghai Gas

摘　　要：某型直接作用式燃气调压器在运行过程中,由于高温会出现泄压不准确情况。针对该调压器泄压元件在泄压过程中存在的主要问题,提出了改进措施,将泄压元件的某部位由原来的非一体式结构更改为一体式结构,避免了调压器因为高温导致的“跳停”问题。这一改进措施已取得了较好的实际应用效果。Pressure relief valve failure might occur due to high temperatures at run-time of a certain type of direct acting gas pressure regulator.It proposes improvement measures to address the main problem that exists in the pressure relief component of the pressure regulator during the pressure relief process.A certain part of the pressure relief component is changed from a non-integrated structure to an integrated structure,which could avoid the"tripping"phenomenon of pressure regulator caused by high temperatures.Practical application had achieved a great result through the improvement measures.

关 键 词：燃气调压器 泄压元件 问题分析 改进措施 

分 类 号：TU996[建筑科学—供热、供燃气、通风及空调工程]