基于SolidWorks+C#的空冷器单排管快速建模系统  

Rapid Modeling System of Single-row Tube of Air Cooler Based on SolidWorks+C#

作　　者：邓峰 陈琪 Deng Feng;Chen Qi(Zhejiang Windey Co.,Ltd.,Hangzhou 310022,Zhejiang,China;Hangzhou Steam Turbine Auxiliary Equipment Co.,Ltd.,Hangzhou 310022,Zhejiang,China)

机构地区：[1]浙江运达风电股份有限公司,浙江杭州310022 [2]杭州汽轮辅机有限公司,浙江杭州310022

出　　处：《电站辅机》2023年第4期13-17,共5页Power Station Auxiliary Equipment

摘　　要：目前,汽轮机乏汽冷凝方式主要有两种:一是利用空气来对汽轮机排放出的蒸汽进行冷却循环,简称空冷;二是采用自然界循环水冷却的表面式冷凝器,简称水冷。空冷器根据结构型式可分为单排管空冷器和多排管空冷器,本文针对单排管空冷器,分析优化结构设计,借助三维软件SolidWorks和编程软件,基于SolidWorks良好的二次开发的接口功能,开发一个专用插件,减少设计人为输入差错,提高设计效率。At present,there are two main condensing methods of steam turbine:First,the use of air to cool the steam discharged from the turbine circulator,referred to as air cooling;next is the surface condenser cooled by natural circulating water,referred to as water cooling.Air coolers can be divided into single-row tube air coolers and multi-row tube air coolers according to their structural types.In this paper,the structural design of single-row tube air coolers is analyzed and optimized.With the help of three-dimensional software SlidWorks and programming software,a special plug-in is developed based on the good interface function of secondary development of SolidWorks to reduce the input errors in the design and improve design efficiency.

关 键 词：空冷 单排管 二次开发 

分 类 号：TM621[电气工程—电力系统及自动化]