制药废水处理设施的改造实践与分析  

Transformation practice and analysis of pharmaceutical wastewater treatment facility

作　　者：邓猛 涂晓红 杨万达 张海芹 Deng Meng;Tu Xiaohong;Yang Wanda;Zhang Haiqin(Suzhou Skyray Environmental Technology Co.,Ltd.,Kunshan Jiangsu 215300,China;Wuhan Jinglan Detection Co.,Ltd.,Wuhan Hubei 430000,China;Hubei Zhongjin Environment Co.,Ltd.,Huanggang Hubei 438000,China)

机构地区：[1]苏州天瑞环境科技有限公司,江苏昆山215300 [2]武汉净澜检测有限公司,湖北武汉430000 [3]湖北中锦环境有限公司,湖北黄冈438000

出　　处：《煤化工》2024年第1期40-43,共4页Coal Chemical Industry

摘　　要：针对某制药企业废水处理站原工艺流程缺少厌氧、缺氧处理单元等问题导致的装置无法按原有设计处理能力正常运行、无法达标排放,进行了相应的技术改造。在原有处理工艺“预处理+水解酸化+好氧处理”的基础上,新增了升流式厌氧污泥反应器(UASB)单元和芬顿氧化处理单元等流程。改造后的现场运行效果良好,出水水质远优于GB 8978—1996《污水综合排放标准》中的相关指标要求。The existing process of the wastewater treatment station of one pharmaceutical enterprise had problems such as lack of anaerobic and anoxic treatment units,which made it impossible to operate normally as per designed treatment capacity and unable to meet the standard for discharge.Thus,corresponding technological transformations had been carried out.On the basis of the original treatment process of“pretreatment+hydrolysis acidification+aerobic treatment”,the new UASB unit and Fenton oxidation treatment unit were added.After the transformation,the effluent quality was much better than the relevant indicator requirements of Integrated Wastewater Discharge Standard(GB 8978—1996).

关 键 词：制药废水 工艺改造 芬顿氧化 UASB 

分 类 号：X703[环境科学与工程—环境工程]