不同工艺参数下超音速等离子喷涂层界面结合行为及其分形特性  

Interface Bonding Behavior and Fractal Characteristics of Supersonic Plasma Spraying Coatings under Different Process Parameters

作　　者：王瑞[1] 李嘉杞 王海斗 马国政[3] 柳建 孙晓峰 郭岩宝 赵海朝[1] WANG Rui;LI Jiaqi;WANG Haidou;MA Guozheng;LIU Jian;SUN Xiaofeng;GUO Yanbao;ZHAO Haichao(National Engineering Research Center for Remanufacturing,Army Academy of Armored Forces,Beijing 100072,China;College of Mechanical and Transportation Engineering,China University of Petroleum(Beijing),Beijing 102299,China;National Key Laboratory for Remanufacturing,Army Academy of Armored Forces,Beijing 100072,China)

机构地区：[1]陆军装甲兵学院机械产品再制造国家工程研究中心,北京100072 [2]中国石油大学(北京)机械与储运工程学院,北京102299 [3]陆军装甲兵学院装备再制造技术国防科技重点实验室,北京100072

出　　处：《中国表面工程》2023年第6期117-125,共9页China Surface Engineering

基　　金：国家自然科学基金资助项目(52105234,52130509)。

摘　　要：随着研究不断深入,分形几何可以用来描述涂层的表面形貌和复杂性,分形维数可实现形貌结构的定性描述向定量表征转变。为研究超音速等离子喷涂层界面结合行为与其分形维数之间的关系,采用对比试验研究喷涂距离、喷涂电流等工艺参数对涂层结合界面形貌和结合强度的影响,并引入分形理论对界面结合行为进行定量表征,进而探究结合界面形貌、结合强度、分形维数三者的对应关系。结果表明:相比于喷涂电流,喷涂距离对分形维数的影响更为显著。当喷涂距离为80 mm和100 mm时,随着喷涂电流从400 A增大到500 A,分形维数呈先减小后增大趋势,最小为1.1150;当喷涂距离为120 mm时,粒子在等离子焰流中的飞行时间增长,随电流增大,涂层界面分形维数则先增大后减小。界面分形维数与涂层结合强度之间存在着正相关的对应关系。当分形维数在一定范围内呈增大趋势时,涂层/基体结合界面处孔隙减少、结合强度增大。因此,涂层/基体结合行为的分形特性研究对评价涂层质量具有重要意义。Supersonic plasma spraying is a process that uses an extremely high-energy-density supersonic plasma jet to heat and accelerate the spraying of materials to obtain high spray quality.The formation and presence of heterogeneous interfaces significantly affect the operational performance of refurbished parts.In this study,a Ni60A coating renowned for its robustness and wear resistance is employed as the substrate.The morphology of the highly disorganized and irregular coating/substrate bonding interface is quantitatively characterized by fractal theory.Additionally,the relationship between the interface state and the bonding strength of the supersonic plasma coating is explored.A comparative test is performed to generate coatings with distinct deposition morphologies.This is achieved by controlling the spraying distance and current to vary the melting and flight characteristics when the particles make contact with the matrix.The influences of parameters such as spraying distance,spraying current,and other process variables on the morphology and bonding strength of the coating/substrate bonding interface are studied.Fractal dimensions are calculated using the FracLac plug-in and box-counting methods.Furthermore,the corresponding relationships between the morphology of the binding interface,binding strength,and fractal dimensions are investigated.The results show differences between the pretreated substrate and the bonding interface of the coating/substrate after the spraying process,affecting the bonding strength of the coating.Correspondence related to the deposition process of the coating is found between the surface morphology and fractal dimension.The supersonic plasma-sprayed nickel-based alloy coating and substrate are predominantly mechanically bonded.The bonding occurs though different forms including mosaic,anchoring,spreading,occluding,and compound types.Among these,the mosaic and anchoring types feature barbs,enhancing the contact area between the matrix and the coating.This increased contact area serves

关 键 词：超音速等离子喷涂 结合强度 分形维数 界面形貌 工艺参数 

分 类 号：TG156[金属学及工艺—热处理] TB114[金属学及工艺—金属学]