浅谈用SW6-2011进行齿啮式卡箍强度计算  

Talking about the Strength Calculation of Gear-engaged Clamp with SW6-2011

作　　者：张建儿 Zhang Jianer(Sanyang Paper Machinery Equipment Co.,Ltd.,Sanming Fujian Province,Sanming 365000)

机构地区：[1]福建省三明市三洋造纸机械设备有限公司,三明市365000

出　　处：《中国化工装备》2024年第1期44-48,共5页China Chemical Industry Equipment

摘　　要：齿啮式卡箍结构常做为快开门式压力容器快开门,采用齿啮式卡箍配合上气动或液压驱动可实现该压力容器自动化加卸料,广泛运用到各行各业如三角带硫化罐、巨型轮胎硫化罐及轮胎硫化机的锁模装置等,本文介绍适当增加齿啮式法兰最小端厚度,优化齿啮式卡箍结构的计算方法。The gear type clamp structure is often used as the quick-open door of the pressure vessel.The gear type clamp combined with pneumatic or hydraulic drive can realize the automatic loading and unloading of the pressure vessel,it is widely used in various industries,such as triangle belt curing tank,giant tire curing tank and mold locking device of tire curing press,etc.This article introduces a calculation method for appropriately increasing the minimum end thickness of toothed flange and optimizing the structure of toothed clamp.

关 键 词：SW6-2011 齿啮式卡箍 压力容器 强度 计算 

分 类 号：TH49[机械工程—机械制造及自动化]