无刷交流励磁机换相角过大问题的研究与优化  

Study and Optimization of Excessive Commutation Angle Problem of Brushless AC Exciter

作　　者：黄贤法 赵博 鲍晓华[1] 翁德红 HUANG Xianfa;ZHAO Bo;BAO Xiaohua;WENG Dehong(School of Electrical Engineering and Automation,Hefei University of Technology,Hefei 230009,China;Anhui Exciter Generator Technology Company,Hefei 230031,China)

机构地区：[1]合肥工业大学电气与自动化工程学院,合肥230009 [2]安徽艾格赛特电机科技有限公司,合肥230031

出　　处：《微特电机》2024年第2期32-37,41,共7页Small & Special Electrical Machines

基　　金：国家自然科学基金项目(51977055);安徽省重大科技专项项目(201903a05020042)。

摘　　要：为了提高交流励磁机的励磁性能,通过在交流励磁机的定子磁极上添加阻尼绕组,改善换相角对旋转整流器交流侧和直流侧电压电流的影响,减少换相角造成的负面影响。利用电路等效分析方法,对换相过程进行等效分析,利用有限元仿真软件结合场路耦合的方法来获得交流励磁机的输出电流电压波形。由电路等效以及场路耦合分析结果可以发现,换相角的存在会使输出的电压电流质量变差,通过在定子磁极上添加阻尼绕组,可以有效减小交流励磁机的换相角,同时提高电能质量。To improve the excitation performance of the AC exciter,the influence of the commutation angle on the voltage and current of the AC and DC sides of the rotary rectifier was reduced by adding damping windings to the stator poles of the AC exciter.The equivalent analysis of the commutation process was performed using the equivalent circuit analysis method,and the output current and voltage curves of the alternator were obtained using FEM simulation software combined with the field-circuit coupling method.The circuit equivalent and field coupling analysis show that the presence of commutation angle degrades the output voltage and current quality,so adding damped windings on the stator poles effectively reduces the phase change angle of the AC exciter while improving the power quality.

关 键 词：交流励磁机 阻尼绕组 旋转整流器 换相角 场路耦合 

分 类 号：TM341[电气工程—电机]